大宇叉车电瓶在24V或48V或者80V串联组选出一个参考电池组，用来反映电瓶组中*电池的性能状态。所选的蓄电池应该是初始充电后串联电池组中电压的蓄电池，每月记录参考的电池可估算出叉车蓄电池组的运行状态。在日常维护过程中要按规定的液面添加蒸馏水，不要为了延长加水间隔时间而添加过多的蒸馏水，加水过多电解液会溢出导致漏电。在使用daewoo大宇叉车蓄电池时，请严格遵守安装手册内的建议及守则。整体电池组串联电压很高，重量也很沉，因此安装时，对固定蓄电池箱体的起*线要注意分离，避免接触蓄电池单体*柱短路。大宇叉车电瓶采用全密封结构的*性设计，*蓄电池外壳及使用环境清洁，避免了酸液污染和大宇叉车*部件的腐蚀，同时蓄电池在使用期中加水次数少，省却了用户列行检查维护的麻烦。其优良的配方工艺，使得电池具有内阻小，自放电小，daewoo叉车电池作为叉车、牵引车、搬运车、井下矿用机车等设备的直流动力电源，广泛用于机场、车站、港口、蔬菜和水果市场和工矿企业仓库等场所。大宇叉车蓄电池在充电过程中，当环境温度从25度每*10度时，初始/再次充电的间隔时间应该减少一半。Daewoo forklift batteries in the 24V or 48V or 80V series to choose a reference battery, battery group used to reflect all battery performance status. The battery should be the initial charge lowest voltage in series battery battery, a monthly record of reference cell can estimate the forklift battery operating state. In the maintenance process according to the provisions of the liquid adding distilled water, not to extend the interval time of water and add more distilled water, adding excess electrolyte leaks cause leakage. In the use of Daewoo Daewoo forklift battery, please strictly observe installation manual within the suggestion and code. The whole battery series voltage is high, weight is very heavy, so the installation of stationary battery box, the line to the attention of separation, to avoid contact with battery monomer pole circuit. Daewoo forklift battery adopts the full sealing structure breakthrough design, ensure the battery shell and the use of clean environment, avoiding acid contamination and Daewoo forklift parts corrosion, and the battery during use less water, obviates the users to check out line maintenance trouble. Its excellent formulation process, so that the battery has a *all internal resistance, *all self-discharge, Daewoo forklift battery forklift, tractor, as a transport vehicle, underground mining equipment such as locomotives of the DC power supply, is widely used in airports, stations, ports, vegetable and fruit market and industrial and mining enterprises warehouse etc.. Daewoo forklift battery during charging, when the environment temperature from 25 degrees every increase of10 degrees, the initial / recharge time interval should be reduced by half.
