厂家优惠**K4系列机床控制变压器

*K4系列机床控制变压器

概述

*K4系列机床控制变压器(以下简称变压器)在BK系列控制变压器基础上，我公司技术研发部门经过多年来进一步吸收国内外同类产品的优点，采用*工艺和严谨设计进行制造，并优选国外*方法的接线端子，具有性能优良、工作*、耗能低、体积小、接线*，适用性广等特点，适用于50-60Hz的交流电路中，广泛用于电子工业或工矿企业，机床和机械 设备中作一般电器的控制电源，产品*合GB5226，*/T5555-2001，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000等有关*、国际标准，并荣获欧共体"CE"认证，可与国外产品互换使用。

*K4系列变压器技术特性

初级次级绕组分开绕制，当次级只有一个绕组时，它担负变压器的*额定容量，次级如兼有控制、照明及指示灯绕组时，则按各绕组容量分配分别绕制，对单绕组且有中间抽头的变压器其各中间抽头容量，皆小于变压器的额定容量，只有*高电压输出端可担负额定容量。

*K4Machine Tool Control Transformer

Application:

*K4 series engine bed control transformer (hereafter refers to as transformer) in the BK series control transformer foundation, our company technology research and development department has further absorbed the domestic and foreign similar products after for many years the merit, uses the advanced craft and the rigorous design carries on the manufacture, and the optimal overseas advanced method's binding clamp, has the performance to be fine, the operation reliable, consumes energy, the volume to be *all lowly, wiring security, serviceability broad and so on characteristics, is suitable in the 50-60Hz alternating-current circuit, widely uses in the electronics industry or the Industrial and mining establishment, in the engine bed and the mechanical device makes the common electric appliance's control supply. It conforms to GB5226，*/T5555-201，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000and gets CE approval.

*K4 series transformer technology characteristic

primary secondary circles the system separately, when secondary when a winding, it shoulders the transformer completely the rated capacity, when secondary like has at the same time the control, the illumination and the indicating lamp winding, presses various windings capacity *ignment to circle the system separately, to simplex winding, and has intermediate tap's transformer its each intermediate tap capacity, is *aller than transformer's rated capacity, only then the overvoltage out-port may shoulder the rated capacity.