海斯特叉车电瓶如不是立即使用的，应该将蓄电池组储存在25°C清洁通风的地方。其次叉车蓄电池储存时间，*蓄电池因内部的电化学反应会造成自放电，因此，电池从发运之日起到安装后的初始充电时间不应该*过6个月。海斯特叉车蓄电池采用全密封结构的*性设计，*蓄电池外壳及使用环境清洁，避免了酸液污染和Hyster叉车*部件的腐蚀，同时蓄电池在使用期中加水次数少，省却了用户列行检查维护的麻烦。铅钙合金设计使得Hyster叉车电池具备*长的使用寿命，即使经过长期储存，仍能保持蓄电池的*量！过度充电会很大程度压缩叉车电瓶寿命，严重的话将导致蓄电池报废；海斯特叉车电瓶在正、负*板之间通过一种*的微孔塑料隔离片加以*缘，另外，在负*栅形*板外，加套一种*薄膜，以*由于充电，其*物质泥膏因膨胀而脱落，造成与外界短路。从而*了电池寿命长。海斯特叉车蓄电池采用美国*技术配方组织生产；聚酯纤维排管，弹性好，孔径小，电阻低，透气性高；**缘的软连接线，无漏电电流弹开顶面塞的阀结构，带有*的电解液液面指示器；配带自动补水的注液帽。Hyster forklift battery if not used immediately, should the battery storage at 25°C clean and ventilated places. The second battery forklift battery storage time, all battery due to the electrochemical reaction can cause self discharge, therefore, the battery from the date of shipment after the installation of the initial charging time should be no more than6 months. Hyster forklift battery adopts the full sealing structure breakthrough design, ensure the battery shell and the use of clean environment, avoiding the acid liquid pollution and Hyster forklift parts corrosion, and the battery during use less water, obviates the user check out line maintenance trouble. Lead calcium alloy design makes the Hyster forklift battery has a long service life, even after long-term storage, can still maintain a high energy battery! Excessive charging can be greatly compressed forklift battery life, serious would lead battery scrap; Hyster forklift battery in the positive, negative plate through a special microporous plastic isolation sheet to be insulated, in addition, in the anode grid plates, and a special film, in order to prevent the charging, the active mud paste for expansion and fall off, cause and external short circuit. Thus ensuring long battery life. Hyster forklift batteries imported American technology formula production; polyester fiber pipes, good elasticity, *all aperture, low resistance, high gas permeability; fully insulated soft cable, no leakage current playing the * surface plug valve structure, with a special electrolyte level indicator; equipped with automatic water injection cap.
