图文详情
产品属性
相关推荐

产品型号：GT503WD15MGN40 产品描述：5050三晶白光
相关参数：
光通量：19-23LM	光强：6000-7000mcd
电压：3.0-3.2-3.4V		色温：2700-3200K \\也可看样板定做！
显色指数：73-75
1000H常温下光衰：<4%

Storage

Recommended storage environment

Temperature: 5^oC ~ 30^oC (41^oF ~ 86^oF)

Humidity: 60% RH Max.

Use within 2 days after opening of sealed vapor/*D barrier bags.

If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions.

Baking treatment : 70&plu*n;5℃for 24 hours.

Fold the opened bag firmly and keep in dry environment.

Soldering

Reflow Soldering	Hand Soldering
	Lead Solder	Lead – free Solder
Pre-heat	120~150℃	180~200℃	Temperature	350℃Max.
Pre-heat time	120sec. Max.	120sec. Max.	Soldering time	3sec. Max.
Peak temperature	240℃Max.	260℃Max.		(one time only)
Soldering time	10sec. Max.	10sec. Max.
Condition	refer to	refer to
	Temperature-	Temperature-
	profile 1	profile 2

*After reflow soldering rapid cooling should be avoided.

[Temperature-profile (Surface of circuit board)]

Use the conditions shown to the under figure.

＜1 : Lead Solder＞＜2 : Lead-free Solder＞

[ Recommended soldering pad design ]

Use the following conditions shown in the figure.

Handling of Silicone Resin LEDs

Handling Indications

During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all t*es should not be used to pierce the sealing compound

Figure 1

In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched.

Figure 2

When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented.

This is *ured by choosing a pick and place nozzle which is larger than the LED’s reflector area.

Dimensions for Tape

Dimensions for Reel

Notes:

1.All dimensions are in mm, tolerance is&plu*n;2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

Packing

Notes:

1.All dimensions are in mm, tolerance is&plu*n;2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

$\"\"$

$\"\"$
包装前
$\"\"$
*箱
$\"\"$
$\"\"$
生产车间

$\"\"$
分光编带机

$\"\"$

ASM自动焊线机

$\"\"$
仓库！

贴片SMD3014 3020 3528 3535 5050 3014*生产供应商，三家工厂为您服务，专为灯条，模组，灯具厂家研发*高质量的灯珠！*十年品质。*不用担忧货源找不到，质量找不好，价格谈不拢的问题。你的选择您的满意。欢迎来电咨询与免费索样！附深圳分厂（高拓光电）贴片生产车间供参考，盗图*究！

加工定制

是

类型

LED贴片灯珠

型号

GT503WD11MGN40

外径尺寸

50*50（mm）

灯光颜色

白

材质

软硅胶

供电电压

3.0-3.2，3.2-3.4（V）

功率

0.2（W）

光通量

19-23（LM）

寿命

50000（H）

封装工艺

贴片式

批量生产供应LED灯珠19-23LM白光 5050贴片

Storage

Soldering