3020白光灯珠5-6LM led灯

图文详情
产品属性
相关推荐

产品型号：GT301WD12LGC30

光通：5-6lm

光强：1500-1700mcd

电压：3.0-3.2-3.4V

光源颜色：正白，暖白，冷白

色系色温：色温可定制，也可看样定做！

光衰：1000H常温下小于4%

$\"\"$

$\"\"$
请*我们的外包装和标签！（3020 2K一包装）
$\"\"$
测试环境（远光的测试仪和星光的老化仪）！
$\"\"$
贴片卷盘（3528 2K一卷）

Soldering

Reflow Soldering	Hand Soldering
	Lead Solder	Lead – free Solder
Pre-heat	120~150℃	180~200℃	Temperature	350℃Max.
Pre-heat time	120sec. Max.	120sec. Max.	Soldering time	3sec. Max.
Peak temperature	240℃Max.	260℃Max.		(one time only)
Soldering time	10sec. Max.	10sec. Max.
Condition	refer to	refer to
	Temperature-	Temperature-
	profile 1	profile 2

*After reflow soldering rapid cooling should be avoided.

[Temperature-profile (Surface of circuit board)]

Use the conditions shown to the under figure.

＜1 : Lead Solder＞＜2 : Lead-free Solder＞

[ Recommended soldering pad design ]

Use the following conditions shown in the figure.

Handling of Silicone Resin LEDs

Handling Indications

During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all t*es should not be used to pierce the sealing compound

Figure 1

In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched.

Figure 2

When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented.

This is *ured by choosing a pick and place nozzle which is larger than the LED’s reflector area.

Dimensions for Tape

Dimensions for Reel

Notes:

1.All dimensions are in mm, tolerance is&plu*n;2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

Packing

Notes:

1.All dimensions are in mm, tolerance is&plu*n;2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

图片实物拍摄供大家参考，盗图*究！

加工定制

是

类型

LED装饰灯

型号

3528单晶

外径尺寸

35*28（mm）

灯光颜色

白

材质

软硅胶

供电电压

3.0-3.2-3.4（V）

功率

0.06（W）

光通量

5-6（LM）

寿命

5000（H）

封装工艺

贴片式