图文详情
产品属性
相关推荐
1. General description 概述
The 74HC4051; 74HCT4051 is a high-speed Si-gate CMOS device and is pin compatible
with Low-power Schottky TTL (LSTTL). The device is specified in compliance with JEDEC
standard no. 7A.
The 74HC4051; 74HCT4051 is an 8-channel analog multiplexer/demultiplexer with three
digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent
inputs/outputs (Y0 to Y7) and a common input/output (Z).
With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2.
With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2.
VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E).
The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4051 and 4.5 V to 5.5 V for
74HCT4051. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a
positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically
ground).
74HC4051是一款高速CMOS器件,74HC4051引脚兼容低功耗肖特基TTL(LSTTL)系列。74HC4051遵循JEDEC标准no.7A。
74HC4051是8通道模拟多路选择器/多路分配器,带有3个数字选择端(S0至S2),1个低有效使能端(E),8个独立输入/输出端(Y0至Y7)和1个公共输入/输出端(Z)。
E为低时,8个开关的其中之一将被S0至S2选中(低阻态)。E为高时,所有开关都进入高阻态,直接无视S0至S2。
VCC和GND是数字控制端(S0至S2,E)的供电引脚,74HC4051的VCC至GND范围为2.0 V~10.0 V。74HC4051的模拟输入/输出端(Y0至Y7,Z)在上限VCC和下限VEE之间摆动,VCC-VEE应当不超过10.0 V。
作为一个数字多路选择器/多路分配器,VEE将被连接到GND上(一般是接地)。
2. Features 特性
n Wide analog input voltage range: ±5 V
n Low ON-state resistance:
u 80 W (typical) at VCC - VEE = 4.5 V
u 70 W (typical) at VCC - VEE = 6.0 V
u 60 W (typical) at VCC - VEE = 9.0 V
n Logic level translation:
u To enable 5 V logic to communicate with ±5 V analog signals
n Typical ‘break before make’ built in
祥见:https://www.nxp.com/documents/data_sheet/74HC_HCT4051.pdf
74HC4051
NXP