图文详情
产品属性
相关推荐
1 Device Overview
1.1 Features 1
• Embedded Power Controller • Two Enable Signals Multiplexed with SR-I2C,
• Two Efficient Step-Down DC-DC Converters for Configurable to Control any Supply State and
Processor Cores Processor Cores Supply Voltage
• One Efficient Step-Down DC-DC Converter for I/O • Thermal Shutdown Protection and Hot-Die
Power Detection
• One Efficient Step-Up 5-V DC-DC Converter • An RTC Resource With:
• SmartReflex™ Compliant Dynamic Voltage – Oscillator for 32.768-kHz Crystal or 32-kHz
Management Built-in RC Oscillator for Processor Cores
• 8 LDO Voltage Regulators and One Real-Time – Date, Time, and Calendar
Clock (RTC) LDO (Internal Purpose) – Alarm Capability
• One High-Speed I
2C Interface for General-Purpose • One Configurable GPIO
Control Commands (CTL-I2C) • DC-DC Switching Synchronization Through
• One High-Speed I
2C Interface for SmartReflex Internal or External 3-MHz Clock
Class 3 Control and Command (SR-I2C)
1.2 Applications
• Portable and Handheld Systems • Industrial Systems
1.3 Description
for the I/Os and memory in the system.
The device includes eight general-purpose LDOs providing a wide range of voltage and current
capabilities. The LDOs are fully controllable by the I
2C interface. The use of the LDOs is flexible; they are
intended to be used as follows: Two LDOs are designated to power the PLL and video DAC supply rails
on the OMAP-based processors, four general-purpose auxiliary LDOs are available to provide power to
other devices in the system, and two LDOs are provided to power DDR memory supplies in applications
requiring these memories.
TPS65910A3A1RSLTPS65910A3A1RSLTPS65910A3A1RSLTPS65910A3A1RSL
1设备概述
1.1功能1
•嵌入式电源控制器•两个启用SR-I2C复用的信号,
•两个高效降压DC-DC转换器,可配置,以控制任何供应状态和
处理器核处理器核提供电压
•一种高效的降压DC-DC变换器,用于I/O、热停机保护和热模
功率检测
•高效的5-V DC-DC变换器•RTC资源:
•SmartReflex™的动态电压- 32.768 khz水晶或32-kHz振荡器
为处理器核心管理内置RC振荡器
•8 LDO电压调节器和一个实时日期、时间和日历
时钟(RTC) LDO(内部用途)-报警能力
•一个高速I
一个可配置的GPIO接口
控制命令(CTL-I2C)•DC-DC切换同步通过
•一个高速I
用于SmartReflex内部或外部3-MHz时钟的2C接口
第3类控制与命令(SR-I2C)
1.2应用程序
•便携式和手持系统•工业系统
1.3描述
用于系统中的I/Os和内存。
该装置包括8个通用LDOs,提供宽范围的电压和电流
功能。LDOs完全由I控制
2 c接口。LDOs的使用是灵活的;他们是
用途如下:两个LDOs指定用于PLL和视频DAC供电轨
在基于omap的处理器上,有4个通用的辅助LDOs可供使用
系统中的其他设备和两个LDOs被提供给应用程序中的DDR内存供应
需要这些记忆。
Texas Instruments
电源管理 (PMIC)
20 mA
- 40 C
+ 85 C
SMD/SMT
VQFN-48
供应QPA5389A美国QORVO氮化镓晶体管
TPS78218DDCR 低压差稳压器 TI原装
MAX3748HETE+ 限幅放大器 Maxim
TPS65217BRSLR电源管理 (PMIC)原装TI
MAX4599EUT+T 模拟开关 IC
DS28CM00R-A00+T 安全IC/验证IC Maxim
TPS73033DBVR低压差稳压器 High 原装TI
MAX308CSE+ 多路复用开关 Maxim
CDCLVC1104PWR Texas Instruments 时钟缓冲器 Lo Jitter,1:4 LVCMOS Fan-out
LM5165DRCR Texas Instruments 开关稳压器 3V-65V, 150mA Sync Buck Converter