供应G692L293TCUF-处理器-微控制器

G692L293TCUF-处理器-微控制器

General Description
The G692/G693 are microprocessor (μP) supervisory
circuits used to monitor the power supplies in μP and
digital systems. They provide excellent circuit reliability
and low cost by eliminating external components and
adjustments when used with +5V, +3.3V, +3.0V- powered
circuits. The G692/G693 also provides a debounced
manual reset input.
These circuits perform a single function: they assert a
reset signal whenever the VCC supply voltage declines
below a preset threshold, keeping it asserted for at
least 230ms after VCC has risen above the reset
threshold. Reset thresholds suitable for operation with
a variety of supply voltages are available.
The G693L has an open-drain output stage, while the
G692 have push-pull outputs. The G693L’s open-drain
RESET output requires a pull-up resistor that can be
connected to a voltage higher than VCC.
The G692L have an active-low RESET output, while
the G692H has an active-high RESET output. The reset
comparator is designed to ignore fast transients on
VCC, and the outputs are guaranteed to be in the correct
logic state for VCC down to 1V.
Low supply current makes the G692/G693 ideal for use
in portable equipment. The G692/G693 are available in
a SOT-143, SC-70-5(SOT-353), SOT-23-5 packages.

Applications
Computers
Controllers
Intelligent Instruments
Critical μP and μC Power Monitoring
Portable / Battery-Powered Equipment
Automotive

GMT部分产品型号：
G693L263TCUF 
G682L09TT12U
G2822T11U
G2053FC1U
G693L293TCUF
G2263AV1U
G547G1P81U 
G2227RA1U  
G2257Q51U
G5125T11U
G524B1T11U
G517AL2TB1U
G517AL1TB1U
G524D1T11U
AT5520AR41U
G5520AR41U
G517G1P81U
G529A1TB1U
I2225RV1U
G9141T11U
G5930TBU
G5108P8U
G2225RV1U
G9091-180TA1U
G5728TO1U
G9091-330T11U
G9661-25ADJF11U
G524B2T11U 
G524B1T11U
G5027CRD1D
G547E1P81U
G547E2P81U
G547G2P81U
G913CF
G547E2P11U
G6001AQY1U
G6090RC1U
G5312QN2U
G5329QV1U
G5309QN1U
G529A1TB1U
G517G1P81U
G517G1TO1U
G5126TB1U
G2287J21U
G3206RE1U
G2057BF11U
G1577
G1582
G1583
G1584
G2562
G2510
G2533
G5517