LED灯用高品质牛角铝电解电容器
地区:广东 东莞
认证:
无
图文详情
产品属性
相关推荐
SHS SERIES | STHSERIES | Bitmap | KNSCHA | |||||||||||||||
●EGS Series large size capacitors have "self-standing" terminals | ||||||||||||||||||
and can be directly soldered to printed circuit boards without any | ||||||||||||||||||
fixing clamps or adhesive agents. They are easily fixed to printed | ||||||||||||||||||
circuit boards due to the specially designed terminals. | ||||||||||||||||||
■SPECIFICATIONS | ||||||||||||||||||
Series 系列 | SHS | STH | ||||||||||||||||
Category Temperature Range | 16V ~ 100V: -40 ~ 85℃ | 16V ~ 100V: -40 ~ 105℃ | ||||||||||||||||
160V ~ 450V: -25 ~ 85℃ | 160V ~ 450V: -25 ~ 105℃ | |||||||||||||||||
Nominal Cap. Range 标称容量范围 | 82 ~ 33,000μF | 47 ~ 33,000μF | ||||||||||||||||
Capacitance Tolerance 静电容量允许差 | -20% ~ 20 %(-10 ~ 30 %) | -20% ~ 20 %(20℃,120Hz) | ||||||||||||||||
Leakage Current漏电流 | I=0.02 CV or 3(μA) whichever is smaller, after 5 min | |||||||||||||||||
Dissipation Factor(tanδ) Low Temp. Impedance Stability at 120Hz阻抗稳定性 | 16 V ~ 100V : Dissipation factor at 20℃,120Hz shall not exceed the values | |||||||||||||||||
given in the table of Standard Ratings 160V ~ 450V :≤0.15 | ||||||||||||||||||
W. V . | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 | 160 ~ 450 | |||||||||
Z(-25℃)/Z( 20℃) | 4 | 3 | 3 | 2 | 2 | 4 | ||||||||||||
Z(-40℃)/Z( 20℃) | 15 | 10 | 8 | 6 | 5 | - | ||||||||||||
High Temp. Load Test 高温负荷测试 | The following specifications shall be satisfied when the capacitors are restored to 20℃ | |||||||||||||||||
after the rated working voltage applied for 2,000 hours at 85℃(SHH, at 105℃) | ||||||||||||||||||
Capacitance Change …≤±15% of the initial value | ||||||||||||||||||
Dissipation Factor …≤200% of the initial specified value | ||||||||||||||||||
DC Leakage Current …≤the initial specified value | ||||||||||||||||||
High Temp. Non-Load Test 高温,非负载测试 | The following specifications shall be satisfied when then capacitors are restored | |||||||||||||||||
to 20℃after exposing them at the rated 85℃(SHH, at 105℃) for 1,000 hours | ||||||||||||||||||
without voltage applied to the capacitors for a minimum of 30 minutes, at least 24 | ||||||||||||||||||
hours but not more than 48 hours before the measurements. | ||||||||||||||||||
Capacitance Change ...≤±20% of the initial value | ||||||||||||||||||
Dissipation factor ...≤150% of the initial specified value | ||||||||||||||||||
DC Leakage Current ...≤the initial specified value |
科尼盛
330UF/400V 35*30牛角
铝电解
滤波
圆柱形
大功率
超高频
固定
同向引出线
±20(%)
450(V)
/(mΩ)
330UF(uF)
小于0.15
400(V)
/(mΩ)
40/105