图文详情
产品属性
相关推荐
特性表Characteristics
項次Item | 特性Characteristics | |||||||||
工作溫度範圍 Operating temperature range | -40~ 105℃ | |||||||||
額定電壓範圍 Rated voltage range | 6.3~100v | |||||||||
電容量範圍 Capacitance range | 1~15,000μF | |||||||||
電容量偏差 Capacitance tolerance (20℃,120Hz) | ±20%(M) | |||||||||
漏電流 Leakage current(I) (20℃) | 施加額定電壓2分鐘,After 2 minutes application of rated voltage, I≤0.01CV or 3μA取较大值,Whichever isgreater, C:標稱電容量、μF,Nominal capacitance inμF, V:額定電壓、v,Rated voltage in v, | |||||||||
損耗角正切值 Dissipation factor(Tanδ) (20℃,120 Hz) | 額定電壓W.V.(V) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 100 | |
Tanδ(max.) | 0.22 | 0.19 | 0.16 | 0.14 | 0.12 | 0.10 | 0.08 | 0.07 | ||
標稱電容量大於1,000μF,電容量每增加1,000μF,Tanδ增加0.02。 For capacitance of more than 1,000μF,add 0.02 for every increase of 1,000μF. | ||||||||||
負荷壽命 Load life | 105℃施加額定電壓2,000小時(D≤8㎜,1,000小時)符合如下要求。 The following specifications shall be satisfied when the capacitors are restored to 20℃after the rated voltage has been applied for 2,000 hours(1,000 hours for case dia. 8㎜or less)at 105℃. | |||||||||
電容量變化Capacitance change | ≤20%初始值 ≤20% of the initial value | |||||||||
損耗角正切值Tanδ | ≤200%初始規定值≤200% of the initial specified value | |||||||||
漏電流I | ≤初始規定值 ≤The initial specified value | |||||||||
高温贮存 Shelf life | 105℃貯存1,000小時,符合如下要求。 The following specifications shall be satisfied when the capacitors are restored to 20℃after exposing them at 105℃for 1,000 hours without voltage applied. | |||||||||
電容量變化Capacitance change | ≤20%初始值 ≤20% of the initial value | |||||||||
損耗角正切值Tanδ | ≤150%初始規定值≤150% of the initial specified value | |||||||||
漏電流I | ≤200%初始規定值≤The initial specified value | |||||||||
其它 Others | 符合JIS C5141特性W規定。Satisfies characteristic W of JIS C5141. |
"
knscha
470UF/35V 10*17MM 高频2000小时
铝电解
滤波
圆柱形
大功率
高频
固定
径向引出线
±20(%)
/(mΩ)
470(uF)
/
35(V)
/(mΩ)
/