LPC802M001JDH20FP 微控制器 NXP

LPC802M001JDH20FP

32-bit ARM Cortex-M0+ microcontroller; up to 16 KB flash and 2 KB SRAM; 12-bit ADC; Comparator; 

ARM微控制器 - MCU Cortex-M0 16KB 2KB I2c, SPI, 16 GPIO

General description LPC802M001JDH20FP

The LPC802 are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 15 MHz. The LPC802 supports 16 KB of flash memory and 2 KB of SRAM.

The peripheral complement of the LPC802 includes one I2C-bus interface, up to two USARTs, one SPI interface, one multi-rate timer, self-wake-up timer, one general purpose 32-bit counter/timer, one 12-bit ADC, one analog comparator, function-configurable I/O ports through a switch matrix, and up to 17 general-purpose I/O pins.

Features and benefits LPC802M001JDH20FP

 System:

 ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 15 MHz with single-cycle multiplier and fast single-cycle I/O port.

 ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).

 System tick timer.

 AHB multilayer matrix.

 Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.

 Memory:

 16 KB on-chip EEPROM based flash programming memory.

 Code Read Protection (CRP).

 2 KB SRAM.

Applications LPC802M001JDH20FP

 Sensor gateways  Simple motor control

 Industrial  Portables and wearables

 Gaming controllers  Lighting

 8/16-bit applications  Motor control

 Consumer  Fire and security applications

 Climate control