S9S08DV96F2CLFR 微控制器 NXP

地区:广东 深圳
认证:

深圳市中立信电子科技有限公司

金牌会员16年

全部产品 进入商铺

S9S08DV96F2CLFR

8位微控制器 -MCU 8-bit MCU, S08 core, 96KB Flash, 40MHz, -40/+85degC, Automotive Qualified, QFP 48


The MC9S08DZ128 Series Data Sheet has three parts:  • The revision 2 of the addendum to revision 1 of the data sheet, immediately following this cover page.  • The revision 1 of the addendum to revision 1 of the data sheet, following the revision 2 of the  addendum.  • Revision 1 of the data sheet, following the addendum revision 1. The changes described in the  addenda have not been implemented in the specified pages.



8-Bit HCS08 Central Processor Unit (CPU)

• 40-MHz HCS08 CPU (20-MHz bus)

• HC08 instruction set with added BGND instruction

• Support for up to 32 interrupt/reset sources


On-Chip Memory S9S08DV96F2CLFR

• FLASH read/program/erase over full operating voltage and temperature

• EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dual-page erase sector; Program and Erase while executing FLASH; Erase abort

• Random-access memory (RAM)


Power-Saving Modes S9S08DV96F2CLFR

• Two very low power stop modes

• Reduced power wait mode

• Very low power real time interrupt for use in run, wait, and stop


Clock Source Options S9S08DV96F2CLFR

• Oscillator (XOSC) — Loop-control Pierce oscillator;

Crystal or ceramic resonator range of 31.25 kHz to

38.4 kHz or 1 MHz to 16 MHz

• Multi-purpose Clock Generator (MCG) — PLL and

FLL modes; reference clock with nonvolatile trim

(0.2% resolution, 1.5% tolerance over temperature with

internal temperature compensation); External reference

with oscillator/resonator options


型号/规格

S9S08DV96F2CLFR

品牌/商标

NXP

内存大小

8位

工厂包装数量

2000

单位重量

178.250 mg

工作温度

- 40 ℃

工作温度

125 ℃