供应原装631H/2 APEM摇头开关

深圳市跃创芯科技有限公司

只做原装，只有原装，可开票!

电话：18665359397

Q  Q:   632886022

供应原装631H/2 APEM

631H/2摇头摇臂拨动开关2脚2档 纽子开关 开孔12MM

❑ Construction Terminal and contact support are manufactured from a single piece of metal. The contacts ae resistance-welded to the terminal for increased mechanical strength. ❑ Rating These switches are suitable for motor loads and power applications up to 15A 250VAC or 10A 400VAC 631H/2 APEM摇头开关

• Max. current/voltage ratings : see tables below • Peak current : 30A max. during 1/2 sine, 250VAC • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1.000 MΩ min. at 500VDC • Dielectric strength : 2.000 Vrms 50 Hz min. between terminals 2.500 Vrms 50 Hz min. between terminals and frame • Electrical life : 10.000 cycles at full load

Connection • For quick-connect terminals, use 6,3 x 0,8 mm normalized female connectors. • For screw terminals, use : either 1,5 mm2 or 2,5 mm2 rigid wires, or prepared stripped and tin plated flexible wires, or prepared flexible wires with crimped termination per EN 50027 (DIN 46228) Ground connector Compulsory if the panel is not metallic or not connected to ground. Should also be used when front face nut is of plastic material. Order separately, see section I.

T Tropicalized diallylphthalate case (-40°C to +85°C) K Front panel sealing by 1 O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated L Special threaded bushing, length 16 mm (.629) LUXE Chrome plated lever and cap nut U117 TK LUXE Options T, K and LUXE. G Black finish on bushing, lever and nuts. Includes tropicalization (option T) GK Front panel sealing by O-ring and sealing washer (as described in option TK LUXE) + option G G-038 Option G + fluorescent tip on lever. White fluorescent tip becomes luminous when submitted to ultra violet rays.

进口APEM631H/2 摇头摇臂拨动开关2脚2档 纽子开关 开孔12MM