pem防误碰钮子开关帽防误操作破坏防尘罩CSG22KS6
有密封帽可用于开关的防尘，防土以及防水。钮子开关，按钮及翘板开关密封帽
多种颜色可供选择。
CSG系列是热塑性开关保护盖。
轻巧，实用和现代，
具有防破坏金属线密封孔作为标准配置。
专门用于5000M和600H拨动开关。
主要特点 ：
?即使戴着手套也容易抓握
?侧面保护，防止意外操作
?压迫时不会变形或破裂
?超竞争力成本
?APEM SAS设计
?工作温度：-20°C至+55°C（-4°F至+131°F）
?储存温度：-40°C至+85°C（-40°F至+185°F）
?开关护罩的设计可防止意外操作，适用于?11.9（.468）或?12（.472）螺纹套管且摇杆长度为17.5（.688）的开关。
抬起防护罩时，操纵杆可以自由操作。
当防护罩完全按下时，摇杆将锁定在固定位置。
但防护装置不能将执行器复位到所需位置。
??为了正确操作开关，应适当调整开关防护盖帽。
?支撑板材料：热塑料
?盖帽：热塑料
CSG22KS1; CSG25KS1; 蓝色
CSG22KN1; CSG25KN1;
CSG22KS2; CSG25KS2; 黑色
CSG22KN2; CSG25KN2;
CSG22KS3; CSG25KS3; 绿色
CSG22KN3; CSG25KN3;
CSG22KS4; CSG25KS4; 灰色
CSG22KN4; CSG25KN4;
CSG22KS5; CSG25KS5; 黄色
CSG22KN5; CSG25KN5;
CSG22KS6; CSG25KS6; 红色
CSG22KN6; CSG25KN6;
CSG22KS7; CSG25KS7; 白色
CSG22KN7; CSG25KN7;
CSG22KS9; CSG25KS9; 橙色
CSG22KN9; CSG25KN9;
The CSG series is a new range of thermoplastic switch guards.
Light, practical and modern, they feature anti-tamper wire seal hole as standard.
They are intended for use on our 5000M and 600H toggle switches.
Main features :
?Patented design, easier grip even with gloves
?Side protection avoiding inadvertent actuation
?No distortion or break in case of crushing
?Ultra-competitive cost
?Typical Application
? APEM SAS patented design
? Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F)
? Storage temperature : -40 °C to +85 °C (-40 °F to +185 °F)
? Switch guards are designed to prevent accidental lever operation on switches with ? 11.9 (.468) or ? 12 (.472) threaded bushing and lever length 17.5 (.688) outside bushing.
When the guard is raised, the lever can be operated freely.
When the guard is fully depressed, the lever is locked in a stable position.
Please note that these guards are not intended to reset the actuator in the desired position.
For correct switch operation, the switch guard should be adjusted properly (see “Mounting“ below).
? Support plate : thermoplastic
? Cap : thermoplastic
