供应VND7140AJTR 原装 汽车智能功率IC
地区：广东 深圳
认证：
无
图文详情
产品属性
相关推荐
VND7140AJTR 原装 汽车智能功率IC
具有MultiSense模拟反馈的双通道高边驱动器，可用于汽车应用
VND7140AJTR 原装 汽车智能功率IC 的技术参数：
类别 | 有源 |
产品族 | 集成电路（IC） |
系列 | PMIC - 配电开关，负载驱动器 |
开关类型 | 通用 |
输出数 | 2 |
比率 - 输入:输出 | 1：1 |
输出配置 | 高端 |
输出类型 | N 通道 |
接口 | 开/关 |
电压 - 负载 | 4V ~ 28V |
电压 - 供电 (Vcc/Vdd) | 不需要 |
电流 - 输出（MAX） | 8A |
导通电阻（典型值） | 140 毫欧 |
输入类型 | 非反相 |
特性 | 自动重启，状态标志 |
故障保护 | 限流（固定），开路负载检测，超温，过压，UVLO |
工作温度 | -40°C ~ 150°C（TJ） |
安装类型 | 表面贴装型 |
封装/外壳 | 16-PowerLFSOP（0.154"，3.90mm 宽） |
KLMBG2JETD-B041 10K 22+
KLMAG1JETD-B041 10K 22+
KLM8G1GETF-B041 10K 22+
KLM4G1FETE-B041 10K 22+
K4E8E324EB-EGCF 10K 22+
K4E6E304EB-EGCF 10K 22+
K4E6E304EC-EGCG 10K 22+
K4B4G1646E-BCNB 10K 22+
K4A8G165WB-BCRC 10K 22+
只做原装现货 有需求请联系
VND7140AJTR 原装 汽车智能功率IC 的描述：
The device is a double channel high-side driver manufactured using ST proprietary VIPower? M0-7 technology and housed in PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics.
The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off.
A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality.
A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to VCC and OFF-state open-load.
A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices
VND7140AJTR
ST(意法半导体)
PowerSSO
21+/22+
16
