供应高功率倍频器EAMKa-28-SH

产品名称: 双色红外测温探测器－应用于比色测温仪
产品规格: Si-Si、Si-InGaAs等
产品介绍:          公司提供的双色红外测温探测器包含两个光电管，垂直集成在一个密封封装内。

一、特点：
·大的*探测面积
·低噪声，高阻*
·宽波长范围
·紧凑，密封封装
·高饱和度
·with/without  TEC 致冷器

二、典型应用：
·双波长光功率表
·双色红外测温传感器
·比色测温仪
·火焰温度传感器
·分光光度计
·双波长探测器
·IR温度计，应用于热处理，感应加热，以及其它金属材料处理
         它通常应用于非接触温度测量，它通过两个相邻波长的辐射强度比率以及它们同标准黑体辐射曲线的比较来测量温度。这种测量方法的优势是不受目标发射率的变化影响，以及不受被测区域污染物或者移动目标的影响。另外视线以外的、存在RF/EMI干扰的以及真空区域的目标的测量是可能的。它们也在克服目标视域障碍、大气烟雾、水蒸气、窗口污染、小目标或者移动目标的测量方面，具有优势。
产品类型：
1、Silicon-Silicon双色探测器：一个硅光电管放置在另一个硅光电管上面，较短波长的光子被顶部的硅光电管吸收，较长波长的光子被底部的光电管吸收。这两个光电管的电流比率用来监测目标的色温。型号：DTC-140
2、Silicon-InGaAs双色探测器：当一个1.1µm以上的较宽范围的波长被应用时，一个InGaAs光电管就代替了底部底硅光电管。为了更*地测量，稳定InGaAs探测器的温度，采用了两级热电制冷器。
*的器件采用光电响应设计，不需要偏置。它们很理想地耦合到一个电流模式的运算放大器。
      我们还有其它类型的双色光电探测器，如果需要相关资料请联系！

高功率倍频器

　

MODEL   EAMKa-28-SH

Input Frequency:              13.25 to 20 GHz

Input Power:                  +5dBm (T*ical)

Output Frequency:             26.5 to 40 GHz

Output Power:                 23 dBm (Min)

Spurious and Harmonics:       -20 dBc (Max)

Bias:                         +8 V/750 mA (T*)

Input Connector:              K(F)

Output Connector:             K(F) or WR-28 Waveguide with UG599/U Flange

　

MODEL   EME-ADA-1020 / EME-AQA-0510

Input Frequency:              10 to 20 / 5 to 10 GHz

Input Power:                  +5dBm (T*ical)

Output Frequency:             20 to 40 GHz

Output Power:                 19 dBm t*,17dBm min / 19 dBm t*,13dBm min

Spurious and Harmonics:       -20 dBc (Max)

Bias:                         +/-5V

Input Connector:              K(F)

Output Connector:             K(F)

　

MODEL  EAMW94-2-SH

Center Frequency:       　    94 GHz(92-96GHz)

Injection-Locking bandwidth:  ±1 GHz(min)

Input Frequency:              7.23 ±0.077GHz

Input Power:                  +7 dBm (min)

Saturated Output Power:       22dBm(158mW Max.)

Operating Voltage/Current:    +27±0.5V/0.25A

Output Isolator:              integrated

Input Connector:              SMA-F

Output Connector:             WR-10/UG-387/U-M

 

MODEL  EAMW95-10-H

Input Frequency:              12.85 - 14.28 GHz（option）

Input Power:                  10 to 17dBm

Output Frequency:             90 - 100 GHz

Output Power:                 5 - 50mW

Multiplication factor:        7

Consumed power:               8 W

Input connector:              SMA

Output connector:             WR-10/UG-387/U-M

 

MODEL   EAMW96-8-H

Input Frequency:              15.333 – 16.667GHz

Input Power:                  +5dBm (Min) and +10 dBm (Nominal)

Output Frequency:             96.0 +/-2.0 GHz (Min)(91.998-100.002GHz)

Output Power:                 +8 dBm (Min)

Harmonics Suppression:        20 dB (T*)

Bias:                         +8 V/750 mA (T*)

Input Connector  :            SMA (F)

Output Waveguide:             WR-10 with UG387/U Mod Flange

 

       高功率MMIC放大器及开关（有*小定货要求）

　

37-40GHz MMIC Ka-band Power Amplifier

Freq:           37 – 40 GHz

Gain:           16 dB t*.

P1dB:           33 dBm t*

RF Input and Output Internally Matched to 50 Ohms

DC bias:        ≤10VDC

 

33-36GHz MMIC Ka-band Power Amplifier

Freq:           33 – 36 GHz

Gain:           16 dB t*.

P1dB:           33 dBm t*

RF Input and Output Internally Matched to 50 Ohms

DC bias:        ≤10VDC

 

26-40GHz MMIC Low Noise Amplifier

RF frequency:   26 to 40 GHz

Noise figure:   <2.1 dB

Linear gain:    >17 dB

P1dB:           11 dBm, t*ical

Unconditionally stable

Self-bias design (single supply)

DC bias:≤     10VDC

 

 

18-40GHz SPST Pin Switch Broad Bandwidth

Low Loss, < 1 dB max.

High Isolation, > 37 dB

Excellent Return Loss, < -13 dB

Fast Switching Speed, <5 ns

High Power Handling, 37 dBm Peak,33 dBm CW

Self-bias design on-chip(inductor,capacitor on-chip)

DC bias:≤5VDC

 

26-45GHz SPDT(Single pole double throw) Switch

Broad Bandwidth, 26-45 GHz

Low Loss, < 1.3dB

High Isolation, > 30 dB t*ical

Fast Switching Speed, < 5 ns

High Power Handling, 37 dBm Peak,33 dBm CW

Self-bias design on-chip(inductor,capacitor on-chip)

DC bias:≤5VDC

    

          高功率固态放大器模块（有*小定货要求）

　

37-38GHz Ka-band Power Amplifier Module

Freq.:          37–38GHz

Gain:           15,20,30,40,60dB min option

Flattness:      +/- 1dB

P1dB:           37dBm Min

NF:             9dB t*.

VSWR:           2:1 max

Voltage:        15VDC / 20A

Connector:      WR28(K t*e as requested)

 

33.5-34.8GHz Ka-band Power Amplifier Module

Freq.:          33.5–34.8GHz

Gain:           15,20,30,40,60dB min option

Flattness:      +/- 1dB

P1dB:           37dBm Min

NF:             9dB t*.

VSWR:           2:1 max

Voltage:        15VDC / 20A

Connector:      WR28(K t*e as requested)

　

34.5-35.5GHz Ka-band Power Amplifier Module

Freq.:          34.5–35.5GHz

Gain:           15,20,30,40,60dB min option

G. Flattness:   +/- 1dB

P1dB:           37dBm Min

NF:             9dB t*.

VSWR:           2:1 max

Voltage:        15VDC / 20A

Connector:      WR28(K t*e as requested)

　

High Power CW / Pulsed IMPATT Amplifier Series

Freq.:          33-37/43-47/58-62/92-96/12-140GHz

Bandwith:       up to 2GHz depending on numbers of stages

Pulse width:    CW

                long pulse 1us-1ms/0-50% duty

                short pulse 50ns-1us/0-0.5% duty

Power output:   0.1 to 1W @CW

                0.2-1.0W @long pulse

                3,5,10,15,20W@short pulse

Wavegude size:  WR-28/WR-22/WR-15/WR-10/WR-08

　

* 可提供1-50W CW, K to Ka-Band 固态宽带高功率放大器模块,请联络