供应高功率倍频器EME-ADA-1020

信号处理*集成电路：
引脚可编程、多通道跨阻放大器MAZeT 开发了MTIxx系列多通道跨阻放大器，用来配合颜色传感器的使用，对小的光电流进行电流/电压转换。它有4/8/16/32通道的产品提供。每个器件有三级电阻 2Mohm,25 kOhm, 500 kOhm 或者 5 Mohm。这种器件适合光电流从 500 nA 到 5 µA或者 100 µA。
产品资料：
MTI04CS系列多通道跨阻放大器
5、应用资料：
如果需要MCS3系列颜色识别应用，真彩色测量介绍，用MCS传感器再现显示屏的颜色介绍， MCS3和MSCi颜色传感器的颜色测量应用颜色传感器应用于光源质量控制整体三原色颜色传感器介绍，用户*光传感器介绍，快速颜色和几何探测介绍等，这方面的应用资料，请联系 商斯达公司！*氧传感器  M-04 
 
产品描述：
德国IT的*氧传感器M-04，设计性能**合现代*救护和**等高*标准的要求，其可信度高、寿命长、响应时间快、线性度好、*点稳定 
产品主要参数：
测量范围：0-100 Vol.%
传感器理论寿命：＞1000000 Vol.%
工作寿命：空气中6年
输出信号：13-16.5mV
响应时间t90：< 12秒
工作温度：0℃ to 40℃
压力范围：750 to 1250 hPa
接线端口：3个引脚插座
推荐负载值:10Ω
漂移：空气中<1%/每月
重复性：±1%
高功率倍频器

　

MODEL   EAMKa-28-SH

Input Frequency:              13.25 to 20 GHz

Input Power:                  +5dBm (T*ical)

Output Frequency:             26.5 to 40 GHz

Output Power:                 23 dBm (Min)

Spurious and Harmonics:       -20 dBc (Max)

Bias:                         +8 V/750 mA (T*)

Input Connector:              K(F)

Output Connector:             K(F) or WR-28 Waveguide with UG599/U Flange

　

MODEL   EME-ADA-1020 / EME-AQA-0510

Input Frequency:              10 to 20 / 5 to 10 GHz

Input Power:                  +5dBm (T*ical)

Output Frequency:             20 to 40 GHz

Output Power:                 19 dBm t*,17dBm min / 19 dBm t*,13dBm min

Spurious and Harmonics:       -20 dBc (Max)

Bias:                         +/-5V

Input Connector:              K(F)

Output Connector:             K(F)

　

MODEL  EAMW94-2-SH

Center Frequency:       　    94 GHz(92-96GHz)

Injection-Locking bandwidth:  ±1 GHz(min)

Input Frequency:              7.23 ±0.077GHz

Input Power:                  +7 dBm (min)

Saturated Output Power:       22dBm(158mW Max.)

Operating Voltage/Current:    +27±0.5V/0.25A

Output Isolator:              integrated

Input Connector:              SMA-F

Output Connector:             WR-10/UG-387/U-M

 

MODEL  EAMW95-10-H

Input Frequency:              12.85 - 14.28 GHz（option）

Input Power:                  10 to 17dBm

Output Frequency:             90 - 100 GHz

Output Power:                 5 - 50mW

Multiplication factor:        7

Consumed power:               8 W

Input connector:              SMA

Output connector:             WR-10/UG-387/U-M

 

MODEL   EAMW96-8-H

Input Frequency:              15.333 – 16.667GHz

Input Power:                  +5dBm (Min) and +10 dBm (Nominal)

Output Frequency:             96.0 +/-2.0 GHz (Min)(91.998-100.002GHz)

Output Power:                 +8 dBm (Min)

Harmonics Suppression:        20 dB (T*)

Bias:                         +8 V/750 mA (T*)

Input Connector  :            SMA (F)

Output Waveguide:             WR-10 with UG387/U Mod Flange

 

       高功率MMIC放大器及开关（有*小定货要求）

　

37-40GHz MMIC Ka-band Power Amplifier

Freq:           37 – 40 GHz

Gain:           16 dB t*.

P1dB:           33 dBm t*

RF Input and Output Internally Matched to 50 Ohms

DC bias:        ≤10VDC

 

33-36GHz MMIC Ka-band Power Amplifier

Freq:           33 – 36 GHz

Gain:           16 dB t*.

P1dB:           33 dBm t*

RF Input and Output Internally Matched to 50 Ohms

DC bias:        ≤10VDC

 

26-40GHz MMIC Low Noise Amplifier

RF frequency:   26 to 40 GHz

Noise figure:   <2.1 dB

Linear gain:    >17 dB

P1dB:           11 dBm, t*ical

Unconditionally stable

Self-bias design (single supply)

DC bias:≤     10VDC

 

 

18-40GHz SPST Pin Switch Broad Bandwidth

Low Loss, < 1 dB max.

High Isolation, > 37 dB

Excellent Return Loss, < -13 dB

Fast Switching Speed, <5 ns

High Power Handling, 37 dBm Peak,33 dBm CW

Self-bias design on-chip(inductor,capacitor on-chip)

DC bias:≤5VDC

 

26-45GHz SPDT(Single pole double throw) Switch

Broad Bandwidth, 26-45 GHz

Low Loss, < 1.3dB

High Isolation, > 30 dB t*ical

Fast Switching Speed, < 5 ns

High Power Handling, 37 dBm Peak,33 dBm CW

Self-bias design on-chip(inductor,capacitor on-chip)

DC bias:≤5VDC

    

          高功率固态放大器模块（有*小定货要求）

　

37-38GHz Ka-band Power Amplifier Module

Freq.:          37–38GHz

Gain:           15,20,30,40,60dB min option

Flattness:      +/- 1dB

P1dB:           37dBm Min

NF:             9dB t*.

VSWR:           2:1 max

Voltage:        15VDC / 20A

Connector:      WR28(K t*e as requested)

 

33.5-34.8GHz Ka-band Power Amplifier Module

Freq.:          33.5–34.8GHz

Gain:           15,20,30,40,60dB min option

Flattness:      +/- 1dB

P1dB:           37dBm Min

NF:             9dB t*.

VSWR:           2:1 max

Voltage:        15VDC / 20A

Connector:      WR28(K t*e as requested)

　

34.5-35.5GHz Ka-band Power Amplifier Module

Freq.:          34.5–35.5GHz

Gain:           15,20,30,40,60dB min option

G. Flattness:   +/- 1dB

P1dB:           37dBm Min

NF:             9dB t*.

VSWR:           2:1 max

Voltage:        15VDC / 20A

Connector:      WR28(K t*e as requested)

　

High Power CW / Pulsed IMPATT Amplifier Series

Freq.:          33-37/43-47/58-62/92-96/12-140GHz

Bandwith:       up to 2GHz depending on numbers of stages

Pulse width:    CW

                long pulse 1us-1ms/0-50% duty

                short pulse 50ns-1us/0-0.5% duty

Power output:   0.1 to 1W @CW

                0.2-1.0W @long pulse

                3,5,10,15,20W@short pulse

Wavegude size:  WR-28/WR-22/WR-15/WR-10/WR-08

　

* 可提供1-50W CW, K to Ka-Band 固态宽带高功率放大器模块,请联络