图文详情
产品属性
相关推荐
LP8mAh 高容量聚合物电池,锂离子电池,欢迎咨询徐,手机.
容量:5000mAh
电压:3.7V
型号:LP8050110
尺寸:8.2*50.5*112mm max
1-1. | Model No.型号 | : | 8050110PL |
1-2. | Battery T*e 电池类型 | : | Polymer 聚合物 |
1-3. | Battery Cells 电芯 | : | DBK 8050110PL*1 5000MAH |
1-4. | Nominal Voltage 额定电压 | : | 3.7V |
1-5. | Maximum Charge Voltage *大充电电压 | : | 4.2V |
1-6. | Discharge Cut of Voltage放电电压 | : | 2.8V |
1-7. | T*ical Capacity典型容量 | : | 5000mAh at 0.2Ca |
1-8. | Internal Resistance 内阻 | Less than小于 180mΩ | |
1-9. | Temperature Range温度范围 | : | Charge充电:0-45℃ Discharge 放电:-20~60℃ Storage储存:-20-45℃ -10~25℃ More than 3 months*过3月 |
1-10. | Safety Features Battery电池*装置 | : | Each Polymer cell is provided with several internal safety features to prevent over-charge, over-current and to resist physical abuse. Each has a temperature sensitive shut down separator, pressure sensitive tear away for current interruption, a safety vent, and the industries only temperature actuated current interrupter.每个Polymer电池内部都有相应的*措施,以*过充,过流及人为或外界的损坏,每个电芯都有温度/压力敏感电流中断分离器,*排气口,以及*用于工业的温度驱动电流中断 |
1-11. | Protection Circuit Board 保护板 | : | Over charge limit per cell 过充限度/电芯: 4.225V~4.305V Over charge release过充释放: remove charger and discharging取走充电器放电 Over discharge limit per cell 过放限度/电芯: 2.75V~2.85V Over discharge release Voltage Charging Over Charge Current Protection过充电流保护: 4~12A Over Discharge Current Protection过放电流保护: 4~12A Over charge delay time过充*:1s /-0.5s Over discharge delay time过放*:20ms /-10ms Over discharge current delay time过放电流*:6ms /-4ms Short circuit delay time短路*:<17ms Maximum current comsumption*大电流:0.015mA |
1-12. | Warranty保修期 | : | 从购买之日起12月内保修Twelve(12) months limited warranty from date of purchase. |
1-13 | Weight重量 | 76&plu*n;2g | |
1-14 | humidity range湿度范围 | Operating humidity range使用湿度:小于 75% RH Storage humidity range存储湿度: 小于 75% RH |
8.2*50.5*112 max(mm)
3.7V(V)
数码产品通用
相机、摄像机
是
PL8050110
迪比科
2.5(A)
CE
20天
1000
500次
5000(mah)