Gain (Output Voltage Span): +/-10% x V to +/- 50%*V Output at Centre: V/2 +/- (5% xGain) Power Supply: 5V +/-0.5V Transient free (Configs 1, 3, 4 & 5) or 3.3V +/-0.1V (Config 2) Centre Tap Impedance: 1K1 Centre Detect Output: Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF Sensor Type: Hall effect Current Consumption: <13mA (Two axes) - <20mA (Three axes) Loads: Minimum 10K, preferred 100K+ Materials Employed : Shaft - Stainless Steel, Gaiter (Boot) - Neoprene, Others - Brass, Nylon, ABS Weight: 100g Mechanical Operating Angle: X and Y Axes +/- 18 Degrees (subject to choice of limiter). Z Axis +/-25 Degrees Max Load to Mechanism: 400N Storage : -40C to +70C Operating Temperature: -25C to +70C Seal Above Panel: IP 65 - Neoprene gaiter (boot) fitted as standard EMC Emissions: Complies with EN 61000-6- 3:2001 CISPR 22:2005 Class B 30MHz - 11GHz Life Cycles: 10,000,000 cycles (5,000,000 for 3 axes joysticks)
CLASS LEADING INSTALLED DEPTH <19 MM - HALL EFFECT SENSING ONE, TWO OR THREE AXES - 5V OR 3.3V OPERATION EMC SHIELDED - ANALOGUE OR PWM OUTPUTS NEXT GENERATION METAL MECHANISMS
