DP-HPC601型烟度计

烟度计 型号：DP-HPC601

主要功能特点：
     一体化结构设计；
      采用分流式取样技术、柴油机加速、减速和稳速时均可测量烟度；
      数据自动线性化处理，可显示不透光度N、光吸收系数K和对应滤纸式烟度值SF；
      高亮度数码显示；
      采用“空气幕”技术保护光学系统免受污染；
      检测室自动恒温控制，可*冷凝而影响测试精度； 
      附自动时间显示,可选配转速测量和油温测量；
      出现故障自动诊断显示所在单元；
      配内置打印机（或数字RS－232A接口或模拟接口）。
主要技术参数：

测量范围              不透光度N:0～100%(相当烟度值0～10FSN) 

   光吸收系数K:0～16.06m^-1

示值误差              ≤&plu*n;2%(测量值)

稳定性                自动校*，量矩漂移≤&plu*n;1%/4h

重复性                重复误差≤&plu*n;1%

分辨率                0.1%

输出方式              数字直读显示，可附打印机打印烟浓度(暗度)*大值，测试

                      时间、日期等。可附接口与计算机联网

测量烟度温度          70℃(自动恒温)，当温度误差≥&plu*n;10%时，温度及错误指示

                      灯亮

环境条件              温度0～40℃，相对湿度≤90%

电源                  AC100-240V 50Hz 消耗功率150VA

外形尺寸（含支架）    160mm(深)×400mm(宽)×480mm(高) 

重量                  约8kg

MainFeatures:

◆Integrated Structural Design
◆Adopted a triage-t*e sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the *oke
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-t*e *oke SF
◆High-brightness di*al display;
◆Use of "air curtain" technology to protect the optical system from pollution
◆Automatic detection of room temperature control, anti-condensation can affect the testing accuracy
◆Automatically attached to the time display, and optional speed measurement and oil temperature measurement
◆Show where the failure of automatic diagnosis unit;
◆Equipped with built-in printer (or di*al RS-232A interface or *og interface)

Main technical parameters:

Test Scope：No light tran*ission N:：0～100% (equivalent to *oke value 0 ~ 10FSN)

Light absorption coefficient K：0-16 .06 m^-1 
Shows the value error：≤ &plu*n; 2% (measured value)
Stability：Automatic zero, volume moments drift ≤ &plu*n; 1% / 4h
Repeatability：Repeat the error ≤ &plu*n; 1%
Resolution：0.1%
Output Mode：Di*al direct-reading shows that *oke concentrations can be attached

printer (dark degrees) the maximum test time, date and so on. Can be

attached to interface with the computer network
Measurement of *oke temperature：70℃(automatic constant temperature), when

the temperature error of ≥ &plu*n; 10%, the temperature and the error

indicator light
Environmental conditions：Temperature 0 ~ 40℃, relative humidity ≤ 90%
Power：AC100-240V  50Hz Power consumption 150VA
Dimensions (with stand)：160mm (depth) × 400mm (width) × 480mm (H)
Weight：About 8kg

北京亚欧德鹏科技有限公司 联系人：殷经理
电话：  手机：