供应JST MOLEX JAM AMP
地区：广东 深圳
认证：
无
图文详情
产品属性
相关推荐
胶壳１０００包装
端子８０００包装
| 1.0 mm pitch |  | Series | LD-Y connector | -> Detail | ||
| T*e | For LVDS, Thin t*e, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| This wire-to-board connector is designed for Internal I/O port in LCD Monitor/TV, and is with secure locking device that prevents the connector from coming off by wiring operation and/or vibration. | ||||||
| 2 | 1.0 mm pitch |  | Series | SH connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e | |||||
| Rate(AC/DC) |
| |||||
| *Compact, low profile design *Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment. *The receptacle has protrusions on both ends for an operator to disengage the receptacle from the header without holding the wires. | ||||||
| 3 | 1.0 mm pitch |  | Series | SHD connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e, Double-row | |||||
| Rate(AC/DC) |
| |||||
| *Compact, double-row design *Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment. *The receptacle has protrusions on both ends for an operator to disengage the receptacle from the header without holding the wires. | ||||||
| 4 | 1.0 mm pitch |  | Series | SHL connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Thin t*e | |||||
| Rate(AC/DC) |
| |||||
| *Thin design Mounting height is only 1.8mm for normal t*e, and 1.4mm for off-set t*e. *Low insertion force With the contact of unique construction featuring spring action, its insertion into housing is easy with low insertion force, yet with clear click feeling. | ||||||
| 5 | 1.0 mm pitch |  | Series | SHLD connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e, Double-row | |||||
| Rate(AC/DC) |
| |||||
| *Compact, double-row design Mounting height is 5.5mm for side entry t*e. Just fitting to the high density packaging *Line-up the t*e with Secure locking device Secure locking device prevents accidental disconnection. | ||||||
| 6 | 1.0 mm pitch |  | Series | SHLV connector | -> Detail | |
| T*e | For LVDS, Double-row | |||||
| Rate(AC/DC) |
| |||||
| This is the wire to board connector corresponding to the high frequency tran*ission (LVDS:Low Voltage Differential Signaling) with a lot of adoption for PDP, LCD-TV and so it. This connector was developed to have excellent workability, strength and cost performance. Thie connector is used not only for LVDS, but also for multi-circuits connector (*all and space saving t*e) in normal circuit. | ||||||
| 7 | 1.2 mm pitch |  | Series | ACH connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e, Low-profile t*e | |||||
| Rate(AC/DC) |
| |||||
| This connector is compact and low profile t*e, height: 1.4mm and width 4.3mm, 1.2mm pitch wire-to-board connector. | ||||||
| 8 | 1.2 mm pitch |  | Series | ACHL connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e, Low-profile t*e | |||||
| Rate(AC/DC) |
| |||||
| This connector is compact and low profile t*e, height 1.2mm and width 4.7mm, 1.2mm pitch wire-to-board connector. | ||||||
| 9 | 1.25 mm pitch |  | Series | AGH connector | -> Detail | |
| T*e | Disconnectable t*e, For mobile phones, For a battery connection | |||||
| Rate(AC/DC) |
| |||||
| This connector system has excellent operational advantages due to its * entry style. In addition, with the wires on the side, it is low profile, similar to a side entry style. | ||||||
| 10 | 1.25 mm pitch |  | Series | GH connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| Developed for to PDP, LCD or *all electronics equipments. This low insertion force t*e connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector. | ||||||
| 11 | 1.25 mm pitch |  | Series | GHD connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Double-row, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| To meet the requirement of the high density mounting on PC board of flat panel TV, * equipments etc., this connector is designed to the double-row t*e of 1.25mm pitch. Its operability is very well, in spite of the *all size. | ||||||
| 12 | 1.25 mm pitch |  | Series | GVH connector | -> Detail | |
| T*e | Crimp style, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| This connector has the sucking area on the * of connector without suction tape. The side feed t*e for drawing out the wire laterally that considers the workability of mating and normal side entry t*e has been developed. | ||||||
| 13 | 1.5 mm pitch |  | Series | CZH/CZHW connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e | |||||
| Rate(AC/DC) |
| |||||
| *Housing lances *Compact *Interconnction They are interconnectable to the esteemed shrouded headers in the market for CZ/CZW insulation displacement connectors. | ||||||
| 14 | 1.5 mm pitch |  | Series | SZN connector | -> Detail | |
| T*e | Board-in connector, Crimp style, Board-in connector | |||||
| Rate(AC/DC) |
| |||||
| This low-profile, board-in connector, with a mounting height of only 4.25mm and a thickness of 2.4mm, is soldered directly onto PC boards. | ||||||
| 15 | 1.5 mm pitch |  | Series | ZE connector | -> Detail | |
| T*e | Crimp style, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| 1.5mm pitch secure lock t*e connector. Fork-shaped header contact provides the good mating feeling and secure mating operation. | ||||||
| 16 | 1.5 mm pitch |  | Series | ZH connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e | |||||
| Rate(AC/DC) |
| |||||
| *Housing lances *The dimple at the center of the contact ensures positive contact and low contact resistance at all times. *Fully shrouded header *The same shrouded header can be used for the ZR insulation displacement connector. | ||||||
| 17 | 1.5 mm pitch |  | Series | ZPD connector | -> Detail | |
| T*e | Crimp style, Double-row, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| In order to correspond to the high-density PCB designing, this ZPD connector is designed as 1.5mm pitch double row t*e connector with secure locking device. | ||||||
| 18 | 1.8 mm pitch |  | Series | SFH connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Compact t*e, Low-profile t*e | |||||
| Rate(AC/DC) |
| |||||
| This low profile t*e connector with height of 3.0mm is designed for connection to stroboscope flash and realized space saving. | ||||||
| 19 | 2.0 mm pitch |  | Series | JWPF connector (W to B) | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, Waterproof connector | |||||
| Rate(AC/DC) |
| |||||
| Applicable for waterproof usage. Its waterproof grade is more than 7 ingress protection of JIS C 0920 (IEC 60529 IPX7). | ||||||
| 20 | 2.0 mm pitch |  | Series | PA connector | -> Detail | |
| T*e | Disconnectable t*e, Crimp style, With secure locking device | |||||
| Rate(AC/DC) |
| |||||
| 2.0mm pitch connector with secure locking device *Secure locking device The housing has a locking device to prevent accidental disconnection because of routing wires or of vibration, and also reverse and different circuit numbers mating | ||||||
