供应的北广精仪硫化橡胶工频电压击穿强度和耐电压强度测试仪

地区:北京 北京市
认证:

北京北广精仪仪器设备有限公司

普通会员

全部产品 进入商铺


 二、硫化橡胶电压击穿试验仪,技术要求
01、输入电压: 交流 220 V
02、输出电压: 交流 0--50 KV ;
               直流 0—50 KV
03、电器容量: 3KVA
04、高压分级: 0-10KV,0--50KV,
05、升压速率: 100V/S 200V/S 500 V/S 1000 V/S 2000V/S  3000V/S 等
              (备注:满足标准要求并可以根据用户需求设定不同的升压速率)
 

三、 *保护

硫化橡胶电压击穿试验仪,电路保护控制:
(1)*压保护 (2)过流保护 (3)短路保护(4)漏电保护 (5)软件误操作保护

   高压输入回路断电保护控制:

   (1)总电源开关        (2)调压器复位开关 (3)高压断电开关
        (4)试验箱门*开关 (5)高压回路开关    (6)漏电保护开关

四、主要配置
标准配置
序号 名称 配置 备注
01 试验主机 一台  
02 控制装置 一套  
03 试验电* 二套(国标1408.1)  
04 试验油箱 二只  
05 放电系统 一套  
06 控制系统 一套  
07 数据采集系统 一套  
08 试验软件 一套 光盘
09 计算机 一套 品牌
10 喷墨打印机 一台 品牌
11 产品使用说明书 一份  
12 计量证书 一份  
13 产品合格证 一份  

四、硫化橡胶电压击穿试验仪,设备*说明:

1、设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

2、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

3、接地要求: 仪器需要单独接地,接地附合*标准要求,金属棒深埋地下至少要1.5米以下。

4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

 

介电强度击穿电压试验仪,击穿强度试验仪, 电压击穿试验仪, *缘材料击穿电压试验仪,耐电压击穿强度试验仪  介电击穿强度试验仪,耐电压强度试验仪 
产品名称:硫化橡胶工频电压击穿强度和耐电压强度测试仪

介电强度击穿电压试验仪,击穿强度试验仪, 电压击穿试验仪, *缘材料击穿电压试验仪,耐电压击穿强度试验仪  介电击穿强度试验仪,耐电压强度试验仪 
产品名称:硫化橡胶工频电压击穿强度和耐电压强度测试仪

Dielectric breakdown voltage tester, dielectric strength tester, voltage tester, insulation breakdown voltage tester, high voltage breakdown strength tester of dielectric breakdown strength tester, dielectric strength tester
Product Name: vulcanized rubber voltage breakdown testing instrument
Product t*e: BDJC-50KV
Control: microcomputer control
Meet the standards: GB1408-2006 electrical strength of insulating materials - Test methods
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and dielectric strength test
GB/T3333 cable paper at power frequency voltage breakdown test method
HG/T 3330 insulating varnish films - Determination of electrical breakdown strength
GB12656 capacitor voltage breakdown test method
ASTM D149 of solid electrical insulating materials at commercial power frequencies of dielectric breakdown voltage and dielectric strength test methods.
A vulcanized rubber, voltage breakdown testing instrument, the applicable scope and the function
Vulcanized rubber voltage breakdown testing instrument, mainly applicable to solid insulation materials ( such as: plastic, rubber, thin film, resin, mica, ceramic, gl*, insulating paint and other media) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Vulcanized rubber voltage breakdown testing instrument, controlled by a computer, through my company independent research and development of new intelligent di*al integrated circuit and software control system two parts to complete, so that the pressure rate truly uniform, accurate, and can accurately measure the leakage current data.
Real time dynamic drawing test curve, display test data, the judgment is accurate, and can be preserved, *ysis, modification, print the test data.
In 1, the instrument in the test process can boost the breakdown process in real time curve drawing, each test boost curve by different color, after testing can be *imposed contrast material testing data repeatability.
2, may at any time to obtain the current and historical test data to view, edit and modify the experimental results.
In 3, during the test can be modified at any time test conditions and storage path and automatic storage test results.
In 4, during the test, may at any time through the software determines the test is effective, convenient screening test results.
In 5, the software set a p*word, p*word generation protection, do special person operation, to avoid irrelevant personnel misoperation.
In 6, the test results edited print, convenient and more user-friendly operation.
In 7, of a group of test curve data of the test results are artificially selected.
In 8, the instrument adopts the advanced contactless original uniform pressure, elimination of similar products in the mechanical drive boosting mode.
Two, vulcanized rubber voltage breakdown testing instrument, technical requirements:
In 01, the input voltage: AC 220 V
In 02, the output voltage: AC 0--50 KV;
DC 0 - 50 KV
03, electrical capacity: 3KVA
In 04, high grade: 0-10KV, 0--50KV,
In 05, 100V/S 200V/S 500 V/S pressure rate: 1000 V/S 2000V/S 5000V/S
( Note: meet the standard requirements and can be based on user needs to set different pressurization rate )
06, test method:
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07, test media: air, test oil
In 08, the installation of high sensitivity over current protection device to ensure that the sample breakdown in 0.05S to cut off the power supply.
09, adopts an intelligent integrated circuit speed boost.
10, support a short time short-circuit test requirements.
11, voltage test accuracy:≤ 1%.
In 12, the test voltage is continuous and adjustable: 0--50KV.
13, the current can be collected to level mA.
14, issued by the country one cl* unit of measurement calibration verification certificate issued or customers designated units of measurement certificate.
15, power: 220V ± 10% single-phase AC voltage and 50Hz±1% frequencies.
16, current and voltage stability: the external power supply voltage fluctuation 10%
Three, security protection
Vulcanized rubber voltage breakdown testing instrument, circuit protection control:
( 1) the overpressure protection ( 2) over-current protection ( 3) short circuit protection ( 4) ( 5) software leakage protection misoperation
High voltage input circuit protection control:
( 1) the total power switch ( 2) regulator reset switch ( 3 ) high voltage disconnecting switch
( 4) test box door safety switch ( 5) high voltage circuit switch ( 6) leakage protection switch
In four, the main configuration
Standard configuration
Name configuration notes
01 experimental hosts
Control device 02 set
03 the test electrode two ( GB 1408.1 )
04 test tank two
The 05 discharge system one set
06 control system
07 data collection system
The 08 test a set of Software CD
09 computer of a brand
The 10 one ink-jet printer brand
11 using a manual
A 12 measurement certificate
13 certificate of product a
Four, vulcanized rubber voltage breakdown testing instrument, equipment safety instructions:
1, equipment to install a separate protective ground. Grounding protection ground, mostly reduce the sample breakdown when the surrounding the strong electromagnetic interference. Also avoid control computer control.
In 2, the test equipment is provided with a number of circuit protection measures, are: over-current protection, under-voltage protection, leakage protection, short-circuit protection, DC test discharge alarm.
3, grounding requirements: instruments require a separate grounding, grounding of a national standard requirements, metal rods buried at least 1.5 meters below.
In 4, the test equipment is provided with a number of circuit protection measures, are: over-current protection, under-voltage protection, leakage protection, short-circuit protection, DC test discharge alarm.
Five, vulcanized rubber voltage breakdown testing instrument, the conventional models for:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
Canton company other insulating materials testing instruments:
BDJC-0-100KV dielectric breakdown testing instrument
BDJC series insulating materials at power frequencies of dielectric breakdown test instrument
BDJC series voltage dielectric strength test apparatus
BDJC series voltage breakdown testing instrument
BDJC series insulating paint film breakdown strength tester
BDJC capacitor voltage breakdown testing instrument
*T-121 volume surface resistivity measuring instrument
GDAT-A dielectric loss tester / dielectric constant test
GDAT-C model dielectric constant dielectric loss tester
BDH leakage resistance tester
BDH-B arc resistance tester
China Inspection and certification services tip and intellectual leader, helped many testing quality inspection units and schools and research units to provide comprehensive one-s* quality solutions.
Pay attention to every detail is Canton company for each customer commitment, and North Canton company has been pursuing the aim of. Beijing North Canton precision instrument equipment limited company



控制方式:微机控制
满足标准:GB1408-2006 *缘材料电气强度试验方法
          GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
          GB/T3333 电缆纸工频电压击穿试验方法
          HG/T 3330*缘漆漆膜击穿强度测定法
          GB12656 电容器纸工频电压击穿试验方法
          ASTM D149 固体电*缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.
一、硫化橡胶电压击穿试验仪,适用范围及功能
硫化橡胶电压击穿试验仪,主要适用于固体*缘材料(如:塑料、橡胶、薄膜、树脂、云母、陶瓷、玻璃、*缘漆等介质)在工频电压或直流电压下击穿强度和耐电压的测试。
硫化橡胶电压击穿试验仪,由电脑控制,通过我公司自主研发的*智能数字集成电路系统与软件控制系统两部分来完成,使升压速率真正做到匀速、准确,并能够准确测出漏电电流的数据。
可实时动态绘制试验曲线,显示试验数据,判断准确,并可保存,分析,修改,打印试验数据。

1、本仪器在试验过程中可对升压击穿过程绘制实时曲线,每次试验的升压曲线都由不同颜色构成,试验结束后可叠加对比材料的试验数据重复性。
2、可以*调取当前及历史试验数据进行查看,编辑及修改实验结果。
3、试验过程中可以*修改试验条件及存储路径及自动存储试验结果。
4、试验过程中,可*通过软件决定本次试验是否*,方便筛选试验结果。
5、可对软件设置*,生成*保护,做到专机专人操作,避免无关人员误操作。
6、 可对试验结果编辑修改后打印,方便操作 更加人性化。
7、可对一组试验中曲线数据的试验结果是否进行人为选定 。
8、本仪器采用*的无触点原件匀速调压方式,淘汰同类产品中机械传动升压方式。
二、硫化橡胶电压击穿试验仪,技术要求:
01、输入电压: 交流 220 V
02、输出电压: 交流 0--50 KV ;
               直流 0—50 KV
03、电器容量: 3KVA
04、高压分级: 0-10KV,0--50KV,
05、升压速率: 100V/S 200V/S 500 V/S 1000 V/S 2000V/S  3000V/S 等
              (备注:满足标准要求并可以根据用户需求设定不同的升压速率)
06、试验方式:
           直流试验:1、匀速升压  2、梯度升压 3、耐压试验
           交流试验:1、匀速升压 2、梯度升压 3、耐压试验
07、试验介质:空气,试验油
08、安装灵敏度较高的过电流保护装置*试样击穿时在0.05S内切断电源。
09、采用智能集成电路进行匀速升压。
10、支持短时间内短路试验要求。
11、电压试验精度: ≤ 1%。
12、试验电压连续可调: 0--50KV。
13、电流可采集到m*。
14、出具*一级计量单位校准检定证书或出具客户指定计量单位的证书。
15、电源:220V±10%的单相交流电压和50Hz±1%的频率。
16、电流电压稳定度: 外界电源电压波动10%时

三、 *保护

硫化橡胶电压击穿试验仪,电路保护控制:
(1)*压保护 (2)过流保护 (3)短路保护(4)漏电保护 (5)软件误操作保护

   高压输入回路断电保护控制:

   (1)总电源开关        (2)调压器复位开关 (3)高压断电开关
        (4)试验箱门*开关 (5)高压回路开关    (6)漏电保护开关

四、主要配置
标准配置
序号 名称 配置 备注
01 试验主机 一台  
02 控制装置 一套  
03 试验电* 二套(国标1408.1)  
04 试验油箱 二只  
05 放电系统 一套  
06 控制系统 一套  
07 数据采集系统 一套  
08 试验软件 一套 光盘
09 计算机 一套 品牌
10 喷墨打印机 一台 品牌
11 产品使用说明书 一份  
12 计量证书 一份  
13 产品合格证 一份  

四、硫化橡胶电压击穿试验仪,设备*说明:

1、设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

2、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

3、接地要求: 仪器需要单独接地,接地附合*标准要求,金属棒深埋地下至少要1.5米以下。

4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

 

 
五、硫化橡胶电压击穿试验仪,常规型号为:
                 
 
                  BDJC-10KV
                  BDJC-20KV
                  BDJC-30KV
                  BDJC-50KV
                  BDJC-100KV

北广公司其它*缘材料检测仪器:

BDJC-0-100KV 介电击穿试验仪

BDJC系列*缘材料工频率介电击穿试验仪

BDJC系列电压介电强度试验仪器

BDJC系列 电压击穿试验仪

BDJC系列*缘漆漆膜击穿强度试验仪

BDJC电容器纸工频电压击穿试验仪

*T-121 体积表面电阻率测定仪

GDAT-A介质损耗测试仪/介电常数测试仪

GDAT-C新型介电常数介质损耗测试仪

BDH 耐漏电起痕试验仪

BDH-B耐电弧试验仪

 

中国检测行业与验证服务的*者和智领者,帮助众多检测质检单位和学校教研单位提供*的*质量解决方案。

注重每一个细节是北广公司对于每个客户的* , 也是北广公司一直追求的宗旨。北京北广精仪仪器设备有限公司  

Dielectric breakdown voltage tester, dielectric strength tester, voltage tester, insulation breakdown voltage tester, high voltage breakdown strength tester of dielectric breakdown strength tester, dielectric strength tester
Product Name: vulcanized rubber voltage breakdown testing instrument
Product t*e: BDJC-50KV
Control: microcomputer control
Meet the standards: GB1408-2006 electrical strength of insulating materials - Test methods
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and dielectric strength test
GB/T3333 cable paper at power frequency voltage breakdown test method
HG/T 3330 insulating varnish films - Determination of electrical breakdown strength
GB12656 capacitor voltage breakdown test method
ASTM D149 of solid electrical insulating materials at commercial power frequencies of dielectric breakdown voltage and dielectric strength test methods.
A vulcanized rubber, voltage breakdown testing instrument, the applicable scope and the function
Vulcanized rubber voltage breakdown testing instrument, mainly applicable to solid insulation materials ( such as: plastic, rubber, thin film, resin, mica, ceramic, gl*, insulating paint and other media) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Vulcanized rubber voltage breakdown testing instrument, controlled by a computer, through my company independent research and development of new intelligent di*al integrated circuit and software control system two parts to complete, so that the pressure rate truly uniform, accurate, and can accurately measure the leakage current data.
Real time dynamic drawing test curve, display test data, the judgment is accurate, and can be preserved, *ysis, modification, print the test data.
In 1, the instrument in the test process can boost the breakdown process in real time curve drawing, each test boost curve by different color, after testing can be *imposed contrast material testing data repeatability.
2, may at any time to obtain the current and historical test data to view, edit and modify the experimental results.
In 3, during the test can be modified at any time test conditions and storage path and automatic storage test results.
In 4, during the test, may at any time through the software determines the test is effective, convenient screening test results.
In 5, the software set a p*word, p*word generation protection, do special person operation, to avoid irrelevant personnel misoperation.
In 6, the test results edited print, convenient and more user-friendly operation.
In 7, of a group of test curve data of the test results are artificially selected.
In 8, the instrument adopts the advanced contactless original uniform pressure, elimination of similar products in the mechanical drive boosting mode.
Two, vulcanized rubber voltage breakdown testing instrument, technical requirements:
In 01, the input voltage: AC 220 V
In 02, the output voltage: AC 0--50 KV;
DC 0 - 50 KV
03, electrical capacity: 3KVA
In 04, high grade: 0-10KV, 0--50KV,
In 05, 100V/S 200V/S 500 V/S pressure rate: 1000 V/S 2000V/S 5000V/S
( Note: meet the standard requirements and can be based on user needs to set different pressurization rate )
06, test method:
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07, test media: air, test oil
In 08, the installation of high sensitivity over current protection device to ensure that the sample breakdown in 0.05S to cut off the power supply.
09, adopts an intelligent integrated circuit speed boost.
10, support a short time short-circuit test requirements.
11, voltage test accuracy:≤ 1%.
In 12, the test voltage is continuous and adjustable: 0--50KV.
13, the current can be collected to level mA.
14, issued by the country one cl* unit of measurement calibration verification certificate issued or customers designated units of measurement certificate.
15, power: 220V ± 10% single-phase AC voltage and 50Hz±1% frequencies.
16, current and voltage stability: the external power supply voltage fluctuation 10%
Three, security protection
Vulcanized rubber voltage breakdown testing instrument, circuit protection control:
( 1) the overpressure protection ( 2) over-current protection ( 3) short circuit protection ( 4) ( 5) software leakage protection misoperation
High voltage input circuit protection control:
( 1) the total power switch ( 2) regulator reset switch ( 3 ) high voltage disconnecting switch
( 4) test box door safety switch ( 5) high voltage circuit switch ( 6) leakage protection switch
In four, the main configuration
Standard configuration
Name configuration notes
01 experimental hosts
Control device 02 set
03 the test electrode two ( GB 1408.1 )
04 test tank two
The 05 discharge system one set
06 control system
07 data collection system
The 08 test a set of Software CD
09 computer of a brand
The 10 one ink-jet printer brand
11 using a manual
A 12 measurement certificate
13 certificate of product a
Four, vulcanized rubber voltage breakdown testing instrument, equipment safety instructions:
1, equipment to install a separate protective ground. Grounding protection ground, mostly reduce the sample breakdown when the surrounding the strong electromagnetic interference. Also avoid control computer control.
In 2, the test equipment is provided with a number of circuit protection measures, are: over-current protection, under-voltage protection, leakage protection, short-circuit protection, DC test discharge alarm.
3, grounding requirements: instruments require a separate grounding, grounding of a national standard requirements, metal rods buried at least 1.5 meters below.
In 4, the test equipment is provided with a number of circuit protection measures, are: over-current protection, under-voltage protection, leakage protection, short-circuit protection, DC test discharge alarm.
Five, vulcanized rubber voltage breakdown testing instrument, the conventional models for:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
Canton company other insulating materials testing instruments:
BDJC-0-100KV dielectric breakdown testing instrument
BDJC series insulating materials at power frequencies of dielectric breakdown test instrument
BDJC series voltage dielectric strength test apparatus
BDJC series voltage breakdown testing instrument
BDJC series insulating paint film breakdown strength tester
BDJC capacitor voltage breakdown testing instrument
*T-121 volume surface resistivity measuring instrument
GDAT-A dielectric loss tester / dielectric constant test
GDAT-C model dielectric constant dielectric loss tester
BDH leakage resistance tester
BDH-B arc resistance tester
China Inspection and certification services tip and intellectual leader, helped many testing quality inspection units and schools and research units to provide comprehensive one-s* quality solutions.
Pay attention to every detail is Canton company for each customer commitment, and North Canton company has been pursuing the aim of. Beijing North Canton precision instrument equipment limited company

型号/规格

bdjc-50kv

品牌/商标

北广精仪仪器