弹性粘接胶MS PLUS-303 夏普化工生产的粘接胶MS PLUS-303是一种单组分*的粘结剂，硬化以后形成一个含有弹性的固体，它能随着被胶体的震动和涨缩而转变吸应力，是一种很*的高科技产品。 ■ *溶化剂，*异氰酸盐，*，*性高。 ■ 无需底涂也能和金属有很好的粘接性。 ■ 可以使用涂料和油漆。 ■ *紫外线性能好。 ■ 还具有断裂伸长率高和柔软*的特点 ● 用途范围 ■ 适用于震动性，冷热变化大的地方的各种板条密封，软质材料的粘结。 ■ 各种的工业，车体．火车．船舶的制造，电器设备，空调的通风管处等。可用于集装箱的密封，汽车底盘的焊缝密封等。 ● 使用方法 ■ 基本的表面*须*干净，干燥 ■ 扭开螺旋式的管口，把内部的*湿膜取出，然后再按上管嘴使用。 ■ 在胶管的适当部位用刀切开后，装上抢管使用。 ■ 为得到良好的质量*，请缩短使用时间。 ● 注意事项 ■ 注意不要长时间直接接触皮肤。 ■ 本品在硬化过程中可能会引起甲醇的挥发，请*要注意作好室内空气的流通。 ■ 请不要接触含有PE,PP 的物体。 ■ 在接胶丙烯板和聚碳酸脂板时,会出现裂缝的可能性,请予先作好适用确认。 ● 性能分析表 项目名称 | 单 位 | 结果 | 备 注 | 色调 | / | 白，黑 | / | 比重 | / | 1.39 | / | 气味 | / | 无臭味 | / | 表面干燥时间 | 分 | 120 | 23℃ | 硬化速度 | mm/24小时 | 3.5 | 23℃ | 硬度 | Shore A | 13 | / | 拉伸强度 | MPa | 0.9 | 3号试验片JIS K6251 | 断裂伸长率 | % | 700 | 3号试验片JIS K6251 | 50%受压时的伸长率 | MPa | 0.1 | 3号试验片JIS K6251 | 体积变化率 | % | ＜3 | / | 折断强度 | MPa | 0.5 | / | 施工适用温度 | ℃ | 5～35 | / | 适用温度范围 | ℃ | -30～90 | / | *下垂性 | mm | 0 | / | *紫外线性 | 试验方法 | 紫外线萤光灯 | 表面没有明显的变化 | DEWPANL LIGHT CONTROL WEATHER MATER FDP | 试验机 | DEWPANL | 试光源距离 | 60mm | 试验时间 | 100小时 | 涂装可能性 | / | 涂料可能(要事前确认) | 不能使用重氧化涂料 |
以上是我公司所做的测定的一部分数据，*供参考。 ● 包装: 320ml/支,10支/箱 ● 储存方法: 在室温10℃到25℃的干燥,阴暗处保管 ● *日期:按照以上的方法保管使用下,从制造日起12个月内*。 关于其他技术问题请*和我们联系 Flexible sealant MS PLUS-303 ● Product description Sharp chemical production of flexible adhesive MS PLUS-303 is one part high-quality binder.After cured it form a high elastic solid. It changes suction stress with the colloidal vibration and sizing. It is a trusted high-tech product. ■ Non-melting agent, does not contain isocyanates, no *ell, high safety. ■ Without rendering coat can also have very good adhesion to metal. ■ Can be painted. ■ Good UV resistance. ■ Also has a high elongation at break and characteristics of softness performance. ● Apply for ■ Applicable to lath sealing and light materials bonding at vibration, large temperature difference between hot and cold. ■A variety of industrial, refrigerator freezer panels sealed, Ship manufacturing,electrical equipment,air-conditioned ventilation and so on. ● Application methods ■ Substrate surface must be clean and dry. ■ Switched on the bolt-style mouth, put out the wetproof membrane, then fitted withnozzles to apply. ■ Cut on the appropriate parts of the hose. Mounted on the barrel. ■ In order to get good quality *urance, please shorten the time of application. ● Caution ■ Pay attention not to direct contact with skin for long time. ■ This product at curing process may lead to evaporation of methanol, be sure to pay attention to make the indoor air circulation. ■ According to the use of different t*es of paint, there may be some problems on the contact surface and sticky to the surface, it must be identified the scope befor the application.Especially when apply with soluble synthetic resin series. ■ Please do not contact containing PE, PP objects. ■ When seal to propylene and polycarbonate sheet, cracks may occur, please confirm befor apply. ● Performance Analysis Table Project Names | unit | Results | Postscript | Color | / | White,black | / | Gravity | / | 1.39 | / | Odor | / | No odor | / | Tack-free time | min | 120 | 23℃ | Hardening rate | mm/24hr | 3.5 | 23℃ | Hardness | Shore A | 13 | / | Tensile strength | MPa | 0.9 | Test on the 3rd film JIS K6251 | Elongation at break | % | 700 | Eiongation at 50% compression | MPa | 0.1 | Volume | % | ＜3 | / | Breaking | MPa | 0.5 | / | Cnstruction | ℃ | 5～35 | / | Application | ℃ | -30～90 | / | Sag resistance | mm | 0 | / | UV Resistance | Test method | Ultraviolet fluorescent | No obvious changes on surface | DEWPANL LIGHT CONTROL WEATHER MATER FDP | Test Machine | DEWPANL | Test light | 60mm | Test time | 100hr | Painting the possibility | / | Coatings possibility(prior to confirmation) | Can not use the re-oxidation coating |
Above are done by my company as part of the test data for reference only ● Package 300ml/piece, 10pieces/Box ● Storage At room temperature 10℃ to 25℃ drying, dark. ● Effective Date In accordance with storage above from the manufacture date of 12 months effective. About other technical issues please do not hesitate to contact with us. | 
