供应OPEL OPCOM op-com can bus 欧宝汽车诊断仪

Description:

OP-COM - PC based Opel diagnostic
VERSION：OPCOM 1.39
OP-COM is a PC based diagnostic program.

It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
The program supports many control units, like Engine, Automatic Tran*ission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:

Full fault code text description

Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application.From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own.

The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.

You can also reset, and program the following immobiliser related items: ECM, BCM, *.
You will need the vehicle security code, which can be found on the CAR-PASS.
You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is U* port based, so there will be * COMPATIBILITY ISSU*, with serial to U* converters.

The speed of the communication over the U*-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the U* port based interface is available for CAN-BUS.
Compared to the TECH2, which is the dealers tool (with a 32 * card+CANdi interface), the price of OP-COM is quite affordable.
Package INCLUDING

1.OP COM Interface

2.U* Cable

3.Software and Drivers CD

批量购买更优惠！
产品质量*，保修期三年！

【由于本公司货物品种较多，所以可能会出现断货现象，为避免延误给您发货的时间,请在购物前与我们沟通联系,以免发生任何的不快而扰乱您的购物乐趣！】

【收货须知：收到货物时，请您务*当着快递员签收，在签收前*须确认箱内的商品*少，*坏，这样就可以签收啦，否则就拒收，这样我们才能帮您处理解决；一旦签收则视为商品完好*，我们也无法解决了，*感谢您的配合。】