LED.led.发光光二*管.LED.LED.食人鱼发光二*管。LED.LED.LED

图文详情
产品属性
相关推荐

在*质量的前提下，价格*，*对*

Features：

●Pb free product—RoHS compliant

● Low power consumption,High efficiency

● Wide viewing angle, High intensity

● I.C. compatible/low current requirement

● Versatile mounting on p.c. board or pannel

● General purpose leads

Package Dimension:

Part *.	Lens Color	Source Color
MF-FR3FF5A-F33B	Water Clear	Red

Notes:

1.All dimensions are in millimeters .

2.Tolerance is &plu*n;0.20mm unless otherwise noted.

3.Protruded resin under flange is 1.0mm max

4.Lead spacing is measured where the leads emerge from the package.

5. Caution in *D:

Static Electricity and surge damages the LED. lt is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.

Absolute Maximum Ratings at Ta=25℃

Parameter	MAX.	Unit
Power Dissipation	80	mW
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)	120	mA
Continuous Forward Current	30	mA
Derating Linear From 50℃	0.4	mA/℃
Reverse Voltage	5	V
Operating Temperature Range	-40℃to +85℃
StorageTemperature Range	-40℃to +105℃
Lead Soldering Temperature [4mm(.157”) From Body]	260℃for 5 Seconds

Electrical Optical Characteristics at Ta=25℃

Parameter	Symbol	Min.	T*.	Max.	Unit	Test Condition
Luminous Intensity	Iv	700	---	1000	mcd	If=20mA (Note 1)
Viewing Angle	2θ1/2	---	90	---	Deg	(Note 2)
Dominant Wavelength	λd	620	---	630	nm	IF=20mA (Note 3)
Forward Voltage	VF	2.0	---	2.3	V	IF=20mA
Reverse Current	IR	---	---	5	µA	VR=5V

Note:

1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

2. θ_1/2is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

3. It use many parameters that correspond to the CIE 1931 2°. X,Y, and Z are CIE 1931 2°values of Red, Green and Blue content of the measurement.

T*ical Electrical / Optical Characteristics Curves

(25℃Ambient Temperature Unless Otherwise Noted)