供应200W美标插座太阳能逆变器U*接口

地区:广东 深圳
认证:

深圳市宝安区沙井泛达电子产品经营部

普通会员

全部产品 进入商铺

  外置开关及U*接口,可24小时以上持续工作不保护

   采用CPU智能芯片控制,开机缓启动能更好的起到保护电器作用,SMT贴片工艺,体积更轻巧,更美观。

    *载起保护工作 、低损耗、*干扰、恒温控制、输出电压值与输出频率*稳定 、负载动态稳定性好 、负载适应*、 高低压输入报警 、电池保护功能 、在*温报警、过载保护时自动关机



 

180W continuous watt 400 watt peak.

200W continuous to 30 Minutes Output power

AC Output voltage: 220v 230v 240v 110v 110v 120v

Input DC Voltage: 12v,24v

Working Voltage : 11-15v, 21-29v

Low-voltage protection: 9-10.5V 18-20.5v

Low-voltage protection: 9.5-11V 19.5-21v

Over-voltage protection: ≥15V ≥29V

Convert efficiency: ≥90%

Overload protection: Yes

Short circuit protection: Yes

Work temperature: -10℃... 50℃

Temperature protection: 60℃...70℃

Output fredquency: 50Hz 60Hz

Output wave: Modified sine wave

Over temperature protection Low battery alarm Over voltage protection Overload protection Low battery shut down I. Uses the American technology transformation module, in sets at the CPU intelligence chip control, can better protect your electric appliance

1.输出电压与频率*稳定、*干扰、*损、高低压 报警、过载过热保护、短路保护自动关机。

2.外形美观,体积小,重量轻,*无噪音;

3.采用*原件,科学设计,*93%的逆变效率,有较高的*启动功能。

适用于: 

家用电器:如彩电、洗衣机、照明等家电设备。商用:如笔记本电脑。移动PC、传真机、打印机、扫描仪等。车用:如手机充电、新闻采访车用摄像机、宣传车、军车、警车、野营、抢险、野外作业、救护等太阳能及风能供电系统

提供OEM**,欢迎新老顾客来电洽谈! 

J

 

  





 

 

使用说明:

一、           接线方法

I. Wiring Method

1. 适用于汽车:把点烟插头的红色线耳连接到逆变器“ ”*,黑色线耳接到逆变器 “-”*;再将另一端点烟插头直接*汽车点烟插座即可。

-        To connect the red & black wires of the *oke attachment to the positive and negative terminals of inverter respectively.

-        To insert the spot *oke attachment to the spot *oke slot of the car.

-         Attention: The polarity of termination must be connected correctly.

2. 适用于船舶或家居:把红色电池线线耳接到逆变器 “ ”*,黑色线线耳接到逆变器 “-”*;另一端的红色夹子夹到蓄电池的“ ”*,黑色夹子夹到蓄电池的“-”*。

b. Uses in Ship or Home Appliance:

- To connect the inverter to the Storage battery by using the red & black wires provided. To connect the red one for positive and black for negative terminalsTo use the ear connection for the inverter and the clip connection for the battery.

提供OEM**,欢迎新老顾客来电洽谈!

 

蓄电池容量的选择:

  1. 须选用与DC输入电压相*的蓄电池,且能够为充电型逆变器提供*的工作电流(即不能小于充电型逆变器满载直流输入电流),如:你有一台12V-220V-500W的充电型逆变器,你*须选用大于50AH的蓄电池。
  2. 蓄电池使用时间的长短可以按照以下公式推算:

使用时间(小时)

                   蓄电池容量AH(安时)

负载的总功率÷充电型逆变器DC输入电压

     提示:蓄电池使用时间的长短还与它的质量及新旧有关。

 

保修说明

1、正常使用下,自购买之日起壹年内,出现质量问题可获免费维修服务。维修时请携带本机保修卡及相关票据到本公司指定地点维修。

2、保险管、电源线、转接头等附属品属于损耗用品,不在保修范围。

3、自然力和人为损坏,不恰当的操作拆修导致正常功能受影响,或*出使用范围的滥用等,本司只提供有偿服务。

 

 

 

加工定制

品牌/商标

中性

型号/规格

P-200

输出电流

0.9(A)

输入电压

12(V)

输出电压

220(V)

输出功率

200(W)

频率范围

50(HZ)

产品

CE