雅杰30mm宽，50mm宽扁平铜编织线

铜编织线软连接简介及用途

东莞雅杰铜编织软连接系列使用于高低压电器，真空电器，高低压开关柜，电焊机，汽车，电力机车，电炉，矿用*爆电器，发电机组，碳刷导线的软连接、整流设备及相关产品软体连接用。采用裸铜线及镀锡铜线的编织带，用冷压方法压制而成。可根据客户要求镀锡镀银。

一、铜编织线制造方法：1、铜编织线采用优质圆铜线（0.10, 0.15, 0.20）或镀锡软圆铜线（0.10, 0.15）以多股（24.36.48锭）经单层或多层编织成。2、铜编织线的直流电阻率（20℃）不大于0.022Ω.mm2/m, 锡铜编织镀线的直流电阻率（20℃）不大于0.0234Ω.mm2/m。 三，铜编织线常用规格按平方可从0.5平方—120平方，按常规宽度可从1mm做到80mm宽，非标的话，可做到2000平方过10000A电流，宽度*大做到250mm宽。

 二、铜编织带软连接：采用铜绞线、铜编织线作为导体，两端采用铜管，铜管表面镀锡处理，接头尺寸按客户要求生产，再通过冷压等*处理，做成软连接、软接地。导电率高、*疲劳能力强。

   Introduction and uses of soft copper braided wire connection英文简介
Dongguan of Yajie copper braided connection series for use in high and low voltage electrical the vacuum electrical, low voltage switch cabinet, welding machines, automobiles, electric locomotive, electric stove, mining explosion-proof electrical generator sets, carbon brush wire soft connection, rectifier equipment and Related Products software connection. Bare copper wire and tinned copper wire braid, cold pressing method repression. Tinned silver plated according to customer requirements.
A copper braided wire manufacturing method: 1, copper braided wire quality round wires (0.10, 0.15, 0.20) or Tinned round copper wire (0.10, 0.15) by the single stranded (24.36.48 ingot) or multilayer woven into. DC resistivity of copper braided wire (20 ℃) is not greater than 0.022Ω.mm2 / m, tin-plated copper braid line DC resistivity (20 ℃) of greater than 0.0234Ω.mm2 / m. Braided copper wire commonly used specifications by the square from 0.5 square -120 square, the conventional width from 1mm to 80mm-wide, non-standard, then, can be done the 2000 square too 10000A current, maximum width do 250mm wide.
 Copper braid soft connection: copper wire, copper braided wire as a conductor, both ends of the br*, br* tin-plated connector size according to customer requirements, and then by cold pressing special treatment, made of soft connected to the soft ground. High conductivity, and the ability of anti-fatigue.