图文详情
产品属性
相关推荐
Features & Applications of product
HY 210 is condensation silicone potting compound in two parts with low viscosity.
It can be cured completely at room temperature. HY 210 works on the surface of material as PC(Poly-carbonate)、PP、ABS、PVC as to its superior bonding feature. It is also applicable for insulation, waterproof and bonding of electronics parts. It meets the requirements of European RoHS.
T*ical Application
- Potting for Protetion of general electronic Module.
- Outdoor protection for LED screen.
Technical Parameters
Properties index |
Part A |
Part B | |
Before Curing |
Appearence |
Black fluid |
Colorless/ yellowish fluid |
Viscosisty(cps) |
2500±500 |
- | |
Features when operation |
Mixing Ratio(By weight) |
10:1 | |
Operating Time( |
20~30 | ||
Curing time (hr,basically cured) |
3 | ||
Curing time (hr,*ly cured) |
24 | ||
Hardness (shore A) |
15±3 | ||
After Curing |
Thermal Conductivity [W(m·K)] |
≥0.2 | |
Dielectric Strength(kV/mm) |
≥25 | ||
dielectric permittivity(1.2MHz) |
3.0~3.3 | ||
Volume resistivity(Ω·cm) |
≥1.0×1016 | ||
Fire Resistance |
94-V1 |
Customers are advised to carry out their own tests on clean, degreased substrates to ensure satisfactory adhesion is achieved. All values are t*ical and should not be accepted as a specification.
(Pls note: all data of this product above tested in
TECHNICAL GUIDELIN*
1, Pls put part A and part B in separate container and stir evenly before mixing the two parts together.
2, Weight Ratio: part A: part B = 10:1
3, Bubble release if necessary. Deaeration the mixture under 0.08 MPa for 3 minutes.
4,HY 210 is cured at room temperature, so pls put it under room temperature after pouring.It comes to next process when basically cured, and it takes about 24 hours for completely cured.
Kindly note: Temperature and Humidity with a tremendous influences for curing of HY 210.
HY 210
hong ye silicone