OMRON欧母龙高频继电器 G6Y-1 4.5VDC 原装价格面谈为准

OMRON欧姆龙高频继电器 G6Y-1 4.5VDC 原装正品价格面谈为准OMRON欧姆龙高频继电器 G6Y-1 4.5VDC 原装正品价格面谈为准OMRON欧姆龙高频继电器 G6Y-1 4.5VDC 原装正品价格面谈为准OMRON欧姆龙高频继电器 G6Y-1 4.5VDC 原装正品价格面谈为准OMRON欧姆龙高频继电器 G6Y-1 4.5VDC 原装正品价格面谈为准

G6Y High-frequency Relay

 

Switching Structure Based on the Micro Strip Line is Used to Combine High Performance and Cost-effectiveness

 

• Isolation characteristics of 65 dB or better at 900 MHz
• Effective insertion loss characteristics of 0.2 dB or better at 900 MHz (half the loss of earlier models)
• Plastic seal construction provides excellent environmental resistance.
• Improved shock-resistance (double the resistance of earlier models)

 

Discontinuation Date: Mar. 31, 2013Ratings
Operational Coil

Item Class Rated voltage (V) 

Rated current (mA)Coil resistance (Ω)Operating voltage (V)Release voltage (V)Max. allowed voltage (V)Power consumption (mW)Basic typeDC4.544.410175% max.10% min.150% (at 23ºC)Approx. 200540.0125922..7720248.32,880

Note:	1.	The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
	2.	The Operating characteristics are measured at a coil temperature of 23ºC.
	3.	The "Max. allowed voltage" is the maximum voltage that can be applied to the relay coil. It is not the maximum voltage that can be applied continuously.

Switch (Contacts)

LoadRated loadRated carry currentMax. contact voltageMax. contact currentMax. switching capacity(reference value)

Resistive load

0.01 A at 30 VAC 0.01 A at 30 VDC 900 MHz, 1 W (see note)

0.5 A

30 VAC 30 VDC

0.5 A

AC10VA DC10W

Note: This value is for a load with V.SWR≤ 1.2.

High-frequency Characteristics

Item250 MHz900 MHz2.5 GHzIsolationInsertion lossV.SWRMax. carry powerMax. switching power

80 db min.	65 db min.	30 db min.
0.5 dB max.	0.5 dB max.	---
1.5 max.	1.5 max.	---
10 W		---
10 W		---

Note:	The impedance of the measuring system is 50 Ω. The table above shows preliminary values.
Note:	1.This value is for a load with V.SWR≤ 1.2.

Characteristics

Contact resistance (see note 1)Operating timeRelease timeInsulation resistance (see note 2)Dielectric strengthVibration resistanceShock resistanceLife expectancyError rate P level(reference value (see note 3))Ambient temperatureAmbient humidityWeight

100 mΩ max.

10 ms max. (approx. 5 ms)

5 ms max. (approx. 1 ms)

100 mΩ min.

1,000 VAC, 50/60 Hz for 1 min between coil and contacts

500 VAC, 50/60 Hz for 1 min between contacts of same polarity

500 VAC, 50/60 Hz for 1 min between coil and ground and between contacts and ground

Destruction: 10 Hz to 55 Hz, 1.5 mm double amplitude Malfunction: 10 Hz to 55 Hz, 1.5 mm double amplitude

Destruction: 1,000 m/s2(approx. 100G) Malfunction: 500 m/s2(approx. 50G)

Mechanical: 1,000,000 operations min. (at 1,800 operations/hr.) Electrical: 300,000 operations min. (under rated load at 1,800 operations/hr.)

10 mVDC, 10µA

Operating: -40ºC to 70ºC (with no icing) Storage: -40ºC to 70ºC (with no icing)

Operating: 35 to 85% Storage: 35 to 85%

Approx. 5 g

Note:	The table above shows preliminary values.
	1.	Measurement Conditions: 5 VDC, 100 mA, voltage drop method
	2.	Measurement Conditions: Measured at the same points as the dielectric strength using a 500-VDC ohmmeter.
	3.	This value is for a switching frequency of 120 operations/minute.