产品详情

供应RJ16K1摇杆型自动复位电位器

地区：广东 佛山
认证： 无

世行有限公司 WORLD WALK CO LTD

普通会员

全部产品 进入商铺
品牌:WORLDWALK 型号:RJ16K1-xxx,Lxx 种类:单联 材料:碳膜 性能:预调 阻值调节方式:旋转式 阻值变化方式:B 标称阻值:500~1M 额定功率:0.2（W） 阻值允许偏差:&plu*n;10（%） 滑动噪声:47（V） *位电阻:10（Ω） 接触电阻:-（Ω） *缘电阻:100（MΩ） *合度:-

内置弹簧,可自动复位,机械角度120度

1.General

1.1Application: This specification is applied to potentiometers used for electronic

equipment.

1.2Standard atmospheric conditions

Unless otherwise specified,the standard range of atmospheric conditions for making

measurements and test is per the following limits:

Ambient temperature ：15℃ to 35℃

Relative humidity ：25% to 75%

Air pressure ：86 kpa to 106 kpa

1.3Operating temperature range ：-10℃ to +50℃

1.4Storage temperature range ：-15℃ to +70℃

1.5Suggested storage period ：About 6 months

2．Electronic Specification :

Item

Conditions

Specifications

2.1

Total resistance

Measurement shall be made by the resistance between terminal 1 and 3 with lever settled at terminal 1 or 3.

20 KΩ

2.2

Resistance Characteristics Availability angle

90°

2.3

Total resistance

tolerance

&plu*n;20%

2.4

Resistance taper

Measurement shall be made by the resistance law method.Measurement stall be made at the position of right diagram from the edge at the side of terminal 1.When based on terminal 3. from the edge at the side of terminal 3.

Out voltage between terminals2and3

--------------------------------------------------- X 100%

Applied voltage between terminals 1and 3

*

2.5

Residual Resistance

1.Opens when the switch

2. Full ccw & Full cw

Max10Ω

2．Electronic Specification :

Item

Conditions

Specifications

2.7

Rated voltage

Rated voltage E=√P.R (V)

P: power rating

R: nominal total resistance

When the rated voltage exceeds the maximum operating voltage, the maximum operating voltage shall be the rated voltage

AC 200 V

2.8

Rotational noise

Dc 20V,when the rated voltage is 20v or less, its rated voltageShall be applied to the terminals between 1 and 3.And then the Procedures, refer to IEC 393-1-4.15 Traveling speed:20=/sec

Less than 47mV

2.9

Insulation resistance

A voltage of 500vAC shall be applied for1min,after which measurement shall be made

100 MΩor more

2.10

Withstand voltage

Trip curr ant:2mA Measuring frequency:50/60Hz

500V AC for 1min.

Without damage to parts,

Arcing or breakdown etc

3. Mechanical Specification :

Item

Conditions

Specifications

3.1

Total rotation angle

120°&plu*n;10°

3.2

Rotation torque

200∽500gf.cm

3.3

Rotation S*

Strength

5kgf.cm Min

3.4

Rotation life

200,000 Cycles Min

4. Soldering conditions

4.1 Manual soldering :

Temperature of soldering iron ：300℃or less.

Application time of soldering iron :within 3s.

4.2 Dip Soldering

Printed wiring board: Single-sided copper clad laminate board with

thickness of 1.6mm .