供应 6.0*30陶瓷保险丝 5.2*20 陶瓷保险丝管。电流保险丝。

无锡组创电子有限公司        
wuxi group and electronic Co.,LTD        
        
(产品规格书）        
        
玻  管  式  保  险  丝        
Fuscs for Instrumcnt,Power and Telephone (Nonindicating)        
1.适应范围:本标准试用于保护仪器,各类电子电器元件,电源供应器和电话机用之玻管式熔断保险丝        
1.Available Ramge:For protccting instrurucnts,all electron or electonal,power supplics and telephone sets.        
2.形状及尺寸如下图，单位：mm        
2.Shape&size as following illustrations,unit:mm        
        
        
        
        
        
                           
         
        
        
2.1构造形状Structurc&Shape如上图 1as shown in ligure above          
  5mm X 20mm                     formall called        
2.2额定电压 Rated Voltage:                                            250V                                     AC.    250V    
2.2额定电流 Ratde Current:                       F10A 快熔型   
        
* Parr Name 部 名  Material   材料   Size  尺寸  
A Ferrule Cap 套合（铜帽）  Capper(inckel plaring)铜（镀镍）   5.16*5.25  
B Tube 铜管  "Soda Gl* (transparenl)
石灰玻璃（透明）"   4.7x19.1mm  
C "Fuse Soluble Eloment
可熔体"  Siler Alloy 银合金线     
D Adhesive 粘胶  "Resin &Hardening Agent
树脂与硬剂"     
E Solder 焊锡  "Naught Lead Tin
无铅锡"     
F Pig 引线  Capper Plaring Tin 铜镀锡   0.65x38x5.85  
        
        
        
3.材   料：        
3.Material        
3.1 玻管本体：透明玻璃管可清晰见到内部之熔线但不可破裂或变形        
3.1 Gl* tube:Transparenr gl* in which the fuse is clesr and pwspcctable.No breaking or deformation        
    is allowed.        
3.2 两端铜帽：须以导电率良好之黄铜底材料。        
3.2 Two br* end caps Made of br* of good conductiviry.        
3.3 铜帽处理：铜帽部分镀镍        
              标示*后若加"3"者，表示须镀镍。        
3.3 Coating of br* caps Plaring the surfacc with nickel If the indicarion is added with"s",it needs        
    to be plard with silver.        
3.4 铜盖强度：铜盖和玻璃本体间的扭力*小720g-cm.        
3.4 Slrcmgth of br* caps The minimum tortion between br* caps and gl* tube is 720g-cm        
4.电气特性：        
4.Charactcristics of Electrical Appliancos        
4.1 负载容量：额定电流测100%，能继续通电*熔化现象。        
4.1 Loading Capacity The Listed Electrical.(Included) add 100%for following,and it's available to let        
    Current Kurrcnt Keep on flowinng without any melding        
4.2 温度特性：进行上项测试1.5  小时，后继续维持原加之电流，每隔十分钟测试一次，继续测试        
    三次，温度不得升高，若使用热偶式测量方法，（Thermometer method)则本体温度在70℃以下        
    若使用温度计测量方法（Thermometer method)则在50℃以下。        
4.2 Temperature proceed: the prccedingtest for1.5  hours,keep testing iteith the original current        
    every 10 minutes.Continue to test it for 3 times .The temperature is not allowed to be higher        
    The main temperature is below 70℃ by way of Thermocouple Method While it keeps below        
    50℃ by way of Thermometer Mcthod.         
4.3 电阻测量：调整保险丝之额定电流值达10%时，在保险丝两端使用高阻*电压表测量降压值        
    以计算电阻值或电桥方式测量（额定电流2.5  安培（含）以上者，无须测量电阻值）        
4.3 Resistance Measuring:Adjust the fuse upto 10% more than listde electrical current the 10%,we        
    mcasure on two ends of the fuse with high voltage meter,and caculare the resistance value with        
    elec-trical brige way.(If the listed currecct equal or more the 2.5  Amp,it's not necessary to        
    measure the resistance value.)        
        
        
        
        
        
        
        

CLEARING TIME        
熔 断 时 限        
        
电流  Ampere   100%   Rating 135%   Rating  200%   Rating   
时间  Time  ＞4h <1h  <120s   
电压 Volfage  250v 250v  250v   
        
5.机械特性Mechanical Properties:Terminal Conncctions&Lead Solderability        
乃经下述三项*        
5.1拉力强度Terminal Strength:当施加轴力向拉力 1.1 磅于两端导线（或套盖） 5 分钟后，        
   无松动或损坏现象发生。        
5.1Leads and/or caps are soldcred(adhcred)to withstand axial pulling force 1.1 pounds 5         
   min without loosening ou any harfulness to firmly arlachment        
5.2 回转强试Torsion Strength:        
   1 固定一端铜头，另一端施加 720 g/cm的力左右摇动，铜头不得拉动及发生任何本体损坏        
          After being subjecteedd to 720 g/cm torsion go one cap while te othe terminal fixed,no any        
         damage or loo*ning resulted        
        
  2  一端导线弯折90度，本体以原轴旋转360度（五秒），三次不同方向旋转。导线或结合处不        
     发生损坏        
       One lead bent through90o,the body be clamped and rotated through 360o at a rate or 5 sec        
        about the original axis,Vophisical damage to leads or connections twsulted after 3 successive        
        -altematero-tations.        
5.3 弯折强度Bending Strength:导线经过两次反方向之弯折后（弯折90度同折回原位谓之一次        
    弯折）不发生损坏        
      After two bends of opposite ditections (bending through an angle of90oand back is detined as        
      one bond)of lead,no damage are to be visualized.        
        
        
        

主要产品有：电流保险丝.保险丝管.保险丝.玻璃管保险丝.陶瓷保险丝.温度保险丝.温度控制器.温度保护器.温度开关.汽车保险丝.汽车保险丝座.*灯保险丝.微型保险丝.贴片保险丝.保险丝座.保险丝夹.保险丝套.保险丝编带夹.
    　　电流保险丝：2.4x7/0.1A-10A/125V/250V/通过各种CCC.UL.CUL.CSA.ROHS认证.
    　　3.0x10/1A-5A/250V/*灯保险丝有各种CCC.UL.CUL.CSA.VDE.ROHS标准.
    　　3.6x10/0.1A-15A/250V/125V/玻璃管保险丝.陶瓷保险丝.双帽引线保险丝通过各种CCC.UL.CUL.CSA.VDE.ROHS.BSI.SEMKO认证.
    4x15/0.1A-30A/125V/250V/玻璃管保险丝.双帽引线保险丝通过CCC.UL.CUL.CSA.ROHS认证.
    　　5x20.6x30.6x32/0.05A-30A/125V/250V/玻璃管保险丝.陶瓷保险丝.保险丝管.双帽引线保险丝通过各种CCC.UL.CUL.CSA.VDE.PSE.ROHS.BSI.SEMKO.CE.EK认证.
    　　8x8.5/0.1A-10A/125V/250V/微型保险丝通过各种CCC.UL.CUL.CSA.VDE.PSE.ROHS.BSI.SEMKO.CE.K认证
    　　我们的产品广泛用于各种电子.电器.电源.充电器.汽车.等等各种电子产品

 WWW.WXFUSE.COM