灯条*6W 12W 18W 12V电源适配器/室内型

1、输入特性（INPUT CHARA*ERISTICS）： 

  1.1输入电压(Input Voltage): 

    额定电压(Nominal Voltage):100-240Vac 

    调整范围（Variation Range）:90-264Vac 

1.2输入频率（Input Frequency）: 

  额定频率（Nominal Frequency）:50/60Hz 

    调整频率（Variation Frequency）:47-63Hz 

1.3输入电流(Input Current): 

当输入交流电压为额定值的下限时,输出电压负载满载，*大输入交流电流0.5A。 

0.5Arms max At any input voltage and rated, DC output rated load. 

2、输出特性（OUTPUT CHARA*ERISTICS）： 

2.1输出功率(Power Output); 

    电压             充电电流范围      峰值电流            输出功率 

    Voltage        Min.Load         Max.Load           Output Power 

   12V               1.0A              1.5A                  12W

2.2负载特性/调整率(Combined Load/Line Regulation): 

    电压           *小空载电压   *大空载电压  线性调整    负载调整     

   12V             12V               12.6V           3%         &plu*n;5%  

2.3效率(Efficiency): 

    当输入100Vac和输出*大负载时,*小80%。 

     80%Min.At 100Vac input and output Max. Load. 

    当输入240Vac和输出*大负载时，*小85%。 

     85%Min.At 240Vac input and output Max. Load.

3、保护功能(PROTE*ION REQUIREMENT): 

3.1短路电路保护: 

    Short Circuit Protection: 

    该电源供给器在短路解除时,能恢复正常工作。 

The power supply will be auto recovered when short circuit faults remove. 

3.2过流保护(Over current Protection)： 

过流故障排除后，电源将自动恢复正常工作。 

     The power supply will be auto recovered when over current faults remove. 

3.3过压保护(Over Voltage Protection) 

    当输出电压*过额定电压时,电源将保护,故障排除后能恢复正常工作。 

The power supply will not be auto recovered when faults remove

4、*及EMC要求(SAFETY AND EMC REQUIREMENT): 

4.1*标准: 

              *合CCC认证.      

4.2高压(DIELE*RIC STRENGTH)：（测试方法按下面接线图） 

()Primary to secondary)：3000Vac/5mA/60s.

5、结构参数(MECHANICAL REQUIREMENT)： 

5.1外壳(Enclosure): 

  外壳尺寸:L78 *W44*H29mm 

     The power supply size L: L78 *W44*H29mm