供应TA228电子秒表
地区：广东 深圳
认证：
无
图文详情
产品属性
相关推荐
型号:TA228
1.秒表功能
2.分段显示功能
3.时、分、秒、月、日、星期显示功能
4.闹时和整点报时功能
5.工作温度范围－5～＋45℃
6.LCD尺寸:4×2.1cm
STOPW*H
Features:
l Three line di* display. Pre-set count-down time
l Multiple memories ability. LAP&SPLIT time display
l 12/24-hr.formats for option. Daily alarm. 1/100sec. precision
LCD Display
S*watch Function
l PressMODO switch to select s*watch mode.“LAP”,“SPLIT”,and “CHRO*” will appear at the middle left.
l Press SELECIONAR switch to start timing
l PressAJUSTEswitch and the first LAP will be displayed on the * line. The first SPLIT time will be displayed on the middle line, and the continuous timing will be displayed at the * left corner of the screen.
l Press AJUSTE switch successively and the sequential LAP time and SPLIT time will be displayed.
l Press SELECIONAR switch to s* the timing.
l PressRECALLswitch to retrieve the fastest(FS) LAP time.
l PressRECALLswitch again to retrieve the slowest(SL) LAP time.
l PressRECALLswitch once more to retrieve the average(*) LAP time.
Note: If the number of LAP time is >100 or LAP/SPLIT time is longer than 10 hours, the fastest (FS), slowest(SL) and the average(*) LAP time function will fail to be shown.
l Press SELECIONARswitch to retrieve first LAP time,“RECALL”will appear under“CHRO*”.
l Press SELECIONAR switch to retrieve sequential LAP time and SPLIT time, or pressMODO switch back to the state where the s*watch s*s.
Note: PressSELECIONAR switch successively, the number of sequential LAP time is shown from first to last.
Press SELECIONAR switch successively, the number of sequential LAP time is shown from last to first.
l PressRECALLswitch to the state where the s*watch s*s, pressSELECIONAR switch to continue the former timing, or pressAJUSTEswitch to reset to zero.
Note: After all the di*s become zero, press SELECIONAR switch to restart a new timing, or pressMODO switch to retrieve the fastest(FS), slowest(SL), and average(*)time once more. After pressingMODO switch, pressSELECIONAR/AJUSTEswitch, then the sequential LAP/SPLIT time will be retrieved again
Count-down Function
l PressMODO switch to select count-down mode. “TR” will be at the * left corner.
l PressRECALLswitch for two seconds, then the di* of hour will blink.
l PressAJUSTEswitch to select the di*s. Each press ofSELECIONAR switch will increase number.
l PressRECALLswitch to complete the pre-setting time while the di*s of the bottom line still remain “0000”.
l Press SELECIONAR switch to start count-down.
l PressSELECIONAR switch to s* count-down.
Note: When the di*s in the middle line become zero, if the pre-setting time is 1 min. or above, the s*watch will beep about 15 seconds; if the pre-setting time is between 1 min. and 11sec. , the s*watch will beep twice; if the pre-setting time is <11 sec. , the s*watch will beep once. After the beep, the di*s at the bottom line will be added 1, then the timer starts working again immediately.
Pacer
l PressMODO switch to select pace mode, then “pace” will appear at the * line. And the two di*s at the bottom line will blink. PressSELECIONARswitch and the following number will be available for selection: 10,20,30,40,60,80,120,160,240,320.
l PressSELECIONAR switch to start pace timing. For example, if a number of 320 is set, there comes 320 times of “beep” per minute. Total time is shown at the * line, the times of beep are shown in the middle line and the bottom line shows the selected.
l PressSELECIONAR switch to s* pacer.
l PressMODO switch to reset to zero.
Note: If pressMODO switch when pacer is working, pacer will s* and memories will be deleted automatically.
Auto-calendar
lPressMODO switch to select calendar display mode. “TH” will be at the * left corner.
lPressRECALLswitch for two seconds, the di*s of “year” will blink.
lPressAJUSTEswitch to select the di*s. Each press ofSELECIONAR switch will increase number.
lPressRECALLswitch to complete the adjustment
lAlarm
PressMODO switch to select alarm mode. “AL” will be at the * left corner.
l PressRECALLswitch for two seconds, the di*s of “hour” will blink.
l PressAJUSTEswitch to select the di*s.
l Press SELECIONAR switch to set the alarming time.
l PressRECALLswitch to complete the alarm setting.
Note: A. The s*watch will automatically beep for 15 sec. when it is alarm setting time.
B. In alarm mode, pressSELECIONAR switch to turn on or turn off the alarming function. “on” will be displayed at the down right corner when it is turned on; “- -” will be displayed at the down right corner when it is turn off.
