产品详情

供应倍加福安全栅HD2-DM-A订货号131000 现货

地区：广东 深圳
认证： 无

深圳乐百龙自动化设备有限公司

VIP会员14年

全部产品 进入商铺
HD2-DM-A
  • 技术参数
  • Documents
  • Approvals+Certificates
  • 配套产品
  • Ask an Expert

  • 产品类别总览
  • 产品样本
  • 浏览所有产品类别

在线服务信息


ADM integrated in Honeywell's Experion PKS
预先与EMERSON AMS 集成的现场总线高级诊断模块

Information about ADM

  • Advanced Diagnostics
  • Activities Supported by ADM
  • Types and Selection Criteria
  • The Diagnostic Manager - Insight and Functionality
  • Setting up Advanced Diagnostics

  • Comprehensive diagnostics for fieldbus physical layer and power supply
  • Plug-in Module for the FieldConnex Power Hub
  • Precise measurements through passive circuits
  • For commissioning, online monitoring and troubleshooting
  • For FOUNDATION Fieldbus and PROFIBUS PA
  • Installation in Zone 2/Class I, Div. 2
  • System state and fault indication via LEDs
  • Display of data in the safety of the control room
  • Automatic setup of diagnostic system
  • Full software integration into DCS and PAM possible

帮助

Datasheet as PDF in following languages:

ENG
FRA

Technical Data: HD2-DM-A

Supply
Rated voltage 19.2 ... 35 V
Rated current 110 ... 30 mA
Power loss max. 2 W
Fieldbus interface
Number of segments 4
Fieldbus type FOUNDATION Fieldbus/PROFIBUS PA
Rated voltage 9 ... 32 V
Indicators/operating means
LED PRI PWR green: on, primary bulk power supply connected
LED SEC PWR green: on, secondary bulk power supply connected
LED Seg 1...4 yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error
Fault signal VFC alarm 1 A, 50 V DC, normally closed
DIP-switch diagnostic address 1...247, binary coded
Electrical isolation
Fieldbus segment/Fieldbus segment functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Fieldbus segment/Supply functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Directive conformity
Electromagnetic compatibility
Directive 2004/108/EC EN 61326-1:2006
Standard conformity
Electromagnetic compatibility NE 21:2006
Protection degree IEC 60529
Shock resistance EN 60068-2-27
Vibration resistance EN 60068-2-6
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Relative humidity < 95 % non-condensing
Shock resistance 15 g 11 ms
Vibration resistance 1 g , 10 ... 150 Hz
Corrosion resistance acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type motherboard specific
Core cross-section motherboard specific
Housing material Polycarbonate
Housing width 18 mm
Housing height 106 mm
Housing depth 128 mm
Protection degree IP20
Mass approx. 100 g
Mounting motherboard mounting
Mating cycles 100
Data for application in connection with Ex-areas
Statement of conformity TÜV 04 ATEX 2500 X
Group, category, type of protection, temperature class Ex-Hexagon II 3G EEx nA IIC T4
Directive conformity
Directive 94/9/EC EN 60079-15:2003
International approvals
FM approval CoC 3024816, CoC 3024816C
Approved for Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nA IIC T4
Certificates and approvals
Marine approval DNV A-10798
型号/规格

HD2-DM-A

品牌/商标

倍加福