产品详情

供应全新倍加福安全栅KHD2-ICD现货库存

地区：广东 深圳
认证： 无

深圳乐百龙自动化设备有限公司

VIP会员14年

全部产品 进入商铺
KFD2-UT2-Ex1
  • 技术参数
  • Documents
  • CAD+CAE
  • Approvals+Certificates
  • Ask an Expert

  • 产品类别总览
  • 产品样本
  • 按产品特性搜索
  • 浏览所有产品类别

在线服务信息



  • 1-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • TC, RTD, potentiometer or voltage input
  • Current output 0/4 mA ... 20 mA
  • Sink or source mode
  • Configurable by PACTwareTM
  • Line fault (LFD) and sensor burnout detection
  • Up to SIL2 acc. to IEC 61508

帮助

Datasheet as PDF in following languages:

ENG
FRA
DEU

Technical Data: KFD2-UT2-Ex1

产品阐述
Current output 0/4 mA ... 20 mA
General specifications
Signal type Analog input
Supply
Connection terminals 14+, 15- or power feed module/Power Rail
Rated voltage 20 ... 30 V DC
Ripple within the supply tolerance
Power loss/power consumption ≤ 0.95 W / 0.95 W
Input
Connection terminals 1, 2, 3, 4
RTD type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995)
type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94)
type Cu10, Cu50, Cu100 (P50353-92)
type Ni100 (DIN 43760)
Measuring current approx. 200 µA with RTD
Types of measuring 2-, 3-, 4-wire connection
Lead resistance max. 50 Ω per lead
Measuring circuit monitoring sensor burnout, sensor short-circuit
Thermocouples type B, E, J, K, N, R, S, T (IEC 584-1: 1995)
type L (DIN 43710: 1985)
type TXK, TXKH, TXA (P8.585-2001)
Cold junction compensation external and internal
Measuring circuit monitoring sensor burnout
Voltage selectable within the range -100 ... 100 mV
Potentiometer 0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)
Input resistance ≥ 1 MΩ (-100 ... 100 mV)
Output
Connection output I: terminal 7: source (-), sink (+), terminal 8: source (+), terminal 9: sink(-)
Output Analog current output
Current range 0 ... 20 mA or 4 ... 20 mA
Fault signal downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)
Source load 0 ... 550 Ω
open-circuit voltage ≤ 18 V
Sink Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V,
series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage.
The maximum value of the resistance is (V - 5)/0.0215 Ω.
Transfer characteristics
Reaction time sensor burnout and sensor short circuit selected where appropriate
mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s
型号/规格

KHD2-ICD

品牌/商标

倍加福