TVS保护管 RCLAMP0522P.T**C保护

RailClamps® are ultra low capacitance TVS arrays
designed to protect high speed data interfaces. This
series has been specifically designed to protect sensitive
components which are connected to high-speed data
and tran*ission lines from overvoltage caused by *D
(electrostatic discharge), CDE (Cable Discharge Events),
and * (electrical fast transients).
The RClampTM0522P and RClampTM0524P have a
t*ical capacitance of only 0.30pF between I/O pins.
This allows it to be used on circuits operating in excess
of 3GHz without signal attenuation. They may be used
to meet the *D immunity requirements of IEC 61000-
4-2, Level 4 (&plu*n;15kV air, &plu*n;8kV contact discharge). The
RClamp0522P is designed to protect two lines, while
the RClamp0524P will protect four lines.
The RClamp0522P is in a 6-pin, RoHS/WEEE compliant,
SLP1610P4 package. It measures 1.6 x 1.0 with a nominal
height of 0.58mm. The RClamp0524P is in a 10-pin,
RoHS/WEEE compliant, SLP2510P8 package. It measures
2.5 x 1.0 with a nominal height of 0.58mm. The
leads are spaced at a pitch of 0.5mm and are finished
with lead-free NiPdAu. They are designed for easy PCB
layout by allowing the traces to run straight through the
device. The combination of *all size, low capacitance,
and high level of *D protection makes them a flexible
solution for applications such as HDMI, DisplayPortTM,
MDDI, and eSATA interfaces