图文详情
产品属性
相关推荐
BU -10KVA 工频系列UPS 6KVAUPS
UPS特性说明:
1、 *的多组CPU智慧型控制藉由微处理器为基础的数字化软件,能*掌控机器各项参数并对其进行*的控制,提供*的计算能力,*机器*处于*佳工作状态。
2、 采用目前**的相位平衡技术,稳定性能好,即使在缺相的情况下仍能正常工作,*适合于许多电力环境比较恶劣的地方工作。
3、 双转换,纯在线式正弦波输出,无论在市电模式或者电池模式,均可输出低失真度的纯净正弦波电源,为用户的负载设备提供*佳的电源保障。
4、 输出带隔离变压器,*负载和公用电网全隔离。装有隔离变压器的机器,负载中不会出现直流成份,能*的保护计算机,网络和通讯设备的开关电源不为直流电流损坏,同时,对于非线性负载,也可表现出优良的动态性能,*了机器的带载能力,且负载兼容性好。
公司简介 宝星电源(深圳)有限公司是专门从事不间断电源(UPS)、消*应急电源(EPS)、交流稳压电源(*R)、 变压器、逆变电源、 低压成套开关设备等产品的生产、销售和整体方案设计的综合性企业。目前:公司已拥有数位资深的电源专家和众多经验丰富的工程技术人员,全员经过*技术培训和考核。我公司产品已取得中华人民共和国*电信设备进网许可证 ,欧共体CE认证 .
经过多年的努力,宝星系列的电源产品已在中国的金融、电信、电力、石化、财税等系统大量使用,并广泛获得好评。多年来,产品不断出口到欧美、中东、南亚等地。公司创办以来,坚持“以质量求生存,以服务求发展”的导向,本着“勤奋、严谨、*、*”的企业精*,不断引进和吸收国内外*技术、 努力控制和完善产品品质,严格控制生产成本,*服务质量和水平,加快科技研发, 努力*企业产品的*竞争力。
售后服务服*:
1.凡购买宝星公司逆变器的顾客,均可享受*联保售后服务。
2.在正常使用条件下,因产品自身质量原因发生故障,从购机之日起,厂家对主机实行三个月免费保换;一年内免费保修 终身提供维修服务。
技术参数表
BU2K~20K(Single in and single out) | |||||||||||||||
Mode: | BU2K | BU3K | BU6K | BU10K | BU15K | BU20K | |||||||||
Capacitg(KW) | 2KVA/1.6 | 3KVA/2.4 | 6KVA/4.8 | 10KVA/8 | 15KVA/12 | 20KVA/16 | |||||||||
Voltage | Single phase with two Lines+ground wire,220V&plu*n;25% | ||||||||||||||
Noise | ≤52dB(distance 1m) | ≤60dB(distance 1m) | |||||||||||||
Size: | 530×264×592 | 630×343×700 | |||||||||||||
(W×D×Hmm) | |||||||||||||||
Weight(Kg) | 40 | 45 | 80 | 145 | 160 | 180 | |||||||||
(excludingthebattery) | |||||||||||||||
| |||||||||||||||
SP6K~60K(Three- ins and single out) | |||||||||||||||
Mode: | BP6K | BP10K | BP15K | BP20K | BP30K | BP40K | BP50K | BP60K | |||||||
Capacitg(KW) | 6KVA/4.8 | 10KVA/8 | 15KVA/12 | 20KVA/16 | 30KVA/24 | 40KVA/32 | 50KVA/40 | 60KVA/48 | |||||||
Voltage | Three phase with four Lines+ground wire,380V&plu*n;25% | ||||||||||||||
Noise | ≤60dB(distance 1m) | ≤65dB(distance 1m) | |||||||||||||
Size: | 620×343×995 | 650×700×1510 | |||||||||||||
(W×D×Hmm) | |||||||||||||||
Weight(Kg) | 130 | 165 | 180 | 220 | 400 | 450 | 530 | 620 | |||||||
(excludingthebattery) | |||||||||||||||
Common parameters
| |||||||||||||||
Input | Frequency | 50Hz /60Hz &plu*n; 10% | |||||||||||||
Power actor | ≥92% | ||||||||||||||
Output | Voltage | {0> 110V&plu*n; 0.5%<}0{><0}
| |||||||||||||
Voltage regulation | Stable voltage&plu*n;1%,dynamic oltage&plu*n;2%,(0-100% load fluctuation20ms) | ||||||||||||||
Frequency stableness | 50Hz /60Hz &plu*n; 0.5% | ||||||||||||||
Frequency torsion rate | Less than 1Hz / second | ||||||||||||||
Instant load status | &plu*n; 0.4%(100% instant load fluctuation) | ||||||||||||||
Harmonic distortion | For linear load, less than 3%(full load),total rectifying harmonics isl* than 5% | ||||||||||||||
Overload capacitance | 150% | ||||||||||||||
Wave form | Sine wave | ||||||||||||||
efficiency | Input AC to output AC | Above 90% | |||||||||||||
Transfer time | Mains power supply fails or restores | 0 second | |||||||||||||
Turns from UPS to BYPASS | Less than 4 ms | ||||||||||||||
Battery | DC Voltage | 192V | |||||||||||||
Charging time | After it is fully charged, it can be filled to 90% of the total capacity after it is charged for 8 hours. | ||||||||||||||
Warning sound | Batterydischarge | If the main power fails, it buzzes once every 4 seconds. | |||||||||||||
If the battery is low, it buzzes once every 0.5 seconds. | |||||||||||||||
If the battery s*s discharging, it buzzes continuously. | |||||||||||||||
In fault tatus | Continuously buzzes | ||||||||||||||
| Battery | Automatically shuts down the machine when the battery power is low, it has no fuse switch protection. | |||||||||||||
Internal Protecting | Overload | After the overload (110~150%) lasts for 10 seconds,it automaticallyjumps to BYPASS. It can automatically restore normal state. | |||||||||||||
device LCD | Temperature is too high | If the internal temperature of the UPS>85°C, it will automatically jump to BYPASS. | |||||||||||||
panel
| Output short circuit | Limits Current, automatically shuts down the machine, without fuse switch protection. | |||||||||||||
| UPS is abnormal | Automatically jumps to BYPASS mode and starts direct mains power supply. | |||||||||||||
| Noise Filter<0} | 10~10KHz at 40 db; 100KHz~100MHz at 70 db | |||||||||||||
| LCD display | Indicating input and output voltage, frequency; battery voltage and output power (%);Temperature | |||||||||||||
| BatteryBVL | One LED, it glows when the battery voltage is low. | |||||||||||||
Outside environment | Temperature | 0~40℃ | |||||||||||||
Relative humidity | 10%~90% (No condensation) | ||||||||||||||
Operation condition | Lower than 1500 meters above sea level (altitude) |