质优价廉背板，硬盘,电脑用SAS 29PIN SMT,DIP连接器,连接器

SATA/*ATA
Material	Housing	High Temperature thermoplastics:LCP/PBT 94V-0
		Color: Black
	Contact	Br*/Phospor Bronze
	Shell	SUS 301/Br*/Zine alloy
Plated	Contact	Gold plated (G/F,5U"/10U''/15U'')
	Shell	Gold/Nickel
Materials and plating can be varied
according to customer definition.
Mechanical Spec.	Insertion Force	35 N Max
	Extraction Force	10N Min(Initial),
		8N Min(10000 Cycles)
	Durability Life	50000 Times
Electrical Spec.	Contact Current Rating	1.5 Amperes
	Dielectric Withstanding Voltage	AC 500V r.m.s
	Insulation Resistance	≥100MΩ
	Contact Resistance	≤30mΩ
	Operating Temperature	-25 oC - 85 oC
Environmental Spec.	Have p*ed below tests:
	1.Salt Fog Test
	2.AIR Reflow Soldering Test
	3.Mechanical Vibration Test
	4.Adhered Tin Test
	5.Temperature Cycle Test
	6. High frequency test
	… …
Application	Serial ATA (SATA or Serial Advanced Technology Attachment) is a computer bus interface for connecting host bus adapters to m* storage devices such as hard disk drives and optical drives. Serial ATA was designed to replace the older ATA (AT Attachment) standard (also known as EIDE), offering several advantages over the older parallel ATA (PATA) interface: reduced cable-bulk and cost (7 conductors versus 40), native hot swapping, faster data transfer through higher signalling rates, and more efficient transfer through an (optional) I/O queuing protocol. SATA host-adapters and devices communicate via a high-speed serial cable over two pairs of conductors. In contrast, parallel ATA (the redesignation for the legacy ATA specifications) used a 16-bit wide data bus with many additional support and control signals, all operating at much lower frequency. To ensure backward compatibility with legacy ATA software and applications, SATA uses the same basic ATA and ATAPI command-set as legacy ATA devices. and cable ASSY.