DC-DC1W隔离模块电源NW1-24S15S稳压

品牌:Sangmei 型号:NW1-24S15S 封装:SIP 批号:1011 类型:电源模块输入电压:DC24（V）输出电压:DC15（V）功率:1（W）

■ T*ical performance/典型性能

◎ 特点：定电压输入，隔离稳压输出，1W功率 Characteristics:Fixed Input,isolation, Unregulated Output,1W

◎ 隔离电压 Isolation voltage：1000VDC/3000VDC

◎ 效率Efficiency ：*(up to) 72%

◎ 工作环境温度 Working temperature ：-40℃～+85℃

◎ MTBF≥350万小时(3500000Hrs)

◎ *合RoHS指令 In line with RoHS codes

◎ 线性调节率 (输入电压变化&plu*n;5%时)&plu*n;0.25% Line regulation (once input change &plu*n;5%) &plu*n;0.25%

◎负载调节率(10%-100%满载) &plu*n;1% Load regulation (10%-100% full load) &plu*n;1%

◎ 纹波/ 噪声(20MHz带宽)＜100mVp-p Ripple and noise (20MHz Band width) <100mVp-p

◎ 可持续短路保护 Constant short circuit protection

■ T*ical product tabulates / 典型产品列表

■ Mechanical Data / 封装尺寸表

封装代号Package Code	L × W × H	L × W × H
A (单路输出 single output)	19.50 × 6.00 × 10.00mm	0.76 × 0.23 × 0.39inch
B ( 两路正负输出 dual output )	27.50 × 9.50 × 12.00mm	1.08 × 0.37 × 0.47inch
C( 两路隔离输出 dual output isolated )	27.50 × 9.50 × 12.00mm	1.08 × 0.37 × 0.47inch
D( 单路输出3000VDC隔离 single output 3000VDC isolated)	19.50 × 6.00 × 10.00mm	0.76 × 0.23 × 0.39inch
E( 两路正负输出3000VDC隔离 dual output 3000VDC isolated)	27.50 × 9.50 × 12.00mm	1.08 × 0.37 × 0.47inch

■ Dimensional Drawing/ 封装尺寸图

■ 封装尺寸A：单路输出 (single route output)SIP

管脚代码	1	2	3	4	5	6	7
功能(Usage)	Vin	GND		-Vo1		+Vo1
▲注：单位尺寸为mm，相邻端子间距为2.54mm，*端子直径为0.65mm ▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm

■ 封装尺寸B：正负两路输出 (Duel route Positlve and negative out)SIP

管脚代码	1	2	3	4	7	9	10
功能(Usage)	Vin	GND			+Vo	-Vo	COM
▲注：单位尺寸为mm，相邻端子间距为2.54mm，*端子直径为0.65mm ▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm.

■ 封装尺寸C：两路隔离输出 (Duel route isolation output)SIP

管脚代码	1	2	6	7	8	9	10
功能(Usage)	Vin	GND		+Vo1	-Vo1	-Vo2	+Vo2
▲注：单位尺寸为mm，相邻端子间距为2.54mm，*端子直径为0.65mm ▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm.

■ 封装尺寸D：单路输出3000VDC隔离 ( Single route output 3000VDC)SIP

管脚代码	1	2	3	4	5	6	7
功能(Usage)	Vin	GND		-Vo		+Vo
▲注：单位尺寸为mm，相邻端子间距为2.54mm，*端子直径为0.65mm ▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm.

■ 封装尺寸E：两路正负输出3000VDC 隔离(Duel route Posivlve and negative out 3000VD)SIP

管脚代码	1	2	3	4	7	9	10
功能(Usage)	Vin	GND			+Vo	-Vo	COM
▲注：单位尺寸为mm，相邻端子间距为2.54mm，*端子直径为0.65mm ▲Note:Aaa unit is mm,all neighboring pin distance is 2.54mm,all ping diameter is 0.65mm.

东莞市东城炫锋电子商行代理“Sangmei”模块电源：DC-DC、AC-DC、DC-AC，广泛应用于*、通信、铁路、电力、*、仪器等行业

联系方式：

：

传真：

：

网址：www.xfefan.cn