供应二手VA-2230A音频分析仪|日本建伍VA2
地区:广东 深圳
认证:
无
图文详情
产品属性
相关推荐
Measuring range....... | V(mV) | dBV | dBm | |
100V | 40.0dBV | 42.2dBm | ||
30V | 29.5dBV | 31.7dVm | ||
10V | 20.0dBV | 22.2dBm | ||
3V | 9.5dBV | 11.7dBm | ||
1V | 0.0dBV | 2.2dBm | ||
300mV | -10.5dBV | -7.8dBm | ||
100mV | -20.0dBV | -17.8dBm | ||
30mV | -30.5dBV | -27.8dBm | ||
10mV | -40.0dBV | -37.8dBm | ||
3mV | -50.5dBV | -47.8dBm | ||
1mV | -60.0dBV | -57.8dBm | ||
0.3mV | -70.5dBV | -67.8dBm | ||
Measuring accuracy.............. | &plu*n;2%of full-scale indication(1KHz) | |||
Frequency response........ | &plu*n;5%(20Hzto 20KHz) reference:1KHz &plu*n;10%(5Hz to 110KHz)reference:1KHz &plu*n;20%(5Hz to210KHz) reference:1KHz | |||
Vestigial noise............ | ≦4μV(80KBW) | |||
Response characteristics.... | actual value | |||
Relative measurement range..... | 0 to&plu*n;130dB | |||
Wattage display...... | Powercalculation based on AC level measurement and virtual load(RL) | |||
Resolution of watt display. | 5di*s max. | |||
Setting range of RL.... | 2 to 5000Ω | |||
Input channel...... | 1CH:for DC input | |||
Input impedance | 1MΩ | |||
DClevel measuring ranges.. | 5 ranges(100V/30V/3V/300mV/30mV) | |||
DC level emasuring accuracy | &plu*n;(0.3%fs+0.75%of measuring value) | |||
Fundamental frequencyrange | 10Hz to 110KHz | |||
Distortionmeasurement range | 100% | 0.0dB | ||
30% | -10.5dB | |||
10% | -20.0dB | |||
3% | -30.5dB | |||
1% | -40.0dB | |||
0.3% | -50.5dB | |||
0.1% | -60.0dB | |||
0.03% | -70.5dB | |||
0.01% | -80.0dB | |||
Secondary harmonic deviation.... | &plu*n;1dB(20Hzto 20KHz) | |||
&plu*n;3dB(all range) | ||||
Fundamental wave removal ratio.. | 110dBor more | |||
60dB(*TCH)+ - 50dB(FET) | ||||
Response characteristics | ||||
(input)......... | actual value | |||
Response charateristics | ||||
(distortion).... | actualvalue | |||
Input level range..... | 1mVto 100V | |||
Input ranges..... | V(mV) | dBV | dBm | |
100V | 40.0dBV | 42.2dBm | ||
30V | 29.5dBV | 31.7dBm | ||
10V | 20.0dBV | 22.2dBm | ||
3V | 9.5dBV | 11.7dBm | ||
1V | 0.0dBV | 2.2dBm | ||
300mV | -10.5dBV | -7.8dBm | ||
100mV | -20.0dBV | -17.8dBm | ||
30mV | 30.5dBV | -27.8dBm | ||
10mV | -40.0dBV | -37.8dBm | ||
3mV | -50.5dBV | -47.8dBm | ||
(30mV to 3mV ranges:manual only) | ||||
Display units..... | Input level:V,dBV,dBm | |||
Distortion:%,dB | ||||
Measuringmode.. | harmonic distortion+noise(THD+N) | |||
Residualnoise/distortion | ||||
(100V,30V,10V,3V&1Vranges).. | ≦-94dB(10Hz to 20KHz,80KBW) | |||
≦-80dB(alllimits,500KBW) | ||||
input≧1/3 offull scale | ||||
(300mV range)...... | ≦-86dB(10Hzto 20KHz,80KBW) | |||
≦-66dB(alllimits,500KBW) | ||||
input≧1/3 offull scale | ||||
(100mV range)..... | ≦-74dB(10Hzto 20Khz,80KBW) | |||
≦-60dB(allilmits,500KBW) | ||||
input≧1/3 offull scale | ||||
(3mV range)...... | ≦-45dB(10Hzto 10KHz,20KBW) | |||
input+2mVrms | ||||
Measuringmode..... | Nos.2-10 harmonic waves are detected and measured | |||
Residual noise/distortion | ||||
(100V,30V,10V,3V&1V range)... | ≦-100dB(10Hzto 20Khz,80KBW) | |||
≦-80dB(alllimits,500KBW) | ||||
input≧1/3 offull scale | ||||
(300mV range)..... | ≦-94dB(10Hzto 20KHz,80KBW) | |||
≦-74dB(alllimits,500KBW) | ||||
input≧1/3 offull scale | ||||
(100mV range)........ | ≦-86dB(10Hzto 20KHz,80KBW) | |||
≦-74dB(alllimits,500KBW) | ||||
input≧1/3 offull scale | ||||
Measuring mode..... | Nos.2-10 harmonicwaves are set to any value and measured Residual | |||
SINAD measuringrange..... | 0 to 40dB(1 range) | |||
ResidualSINAD....... | Same as | |||
Input levl...... | 30μV to 100Vrms | |||
(both S component&N component) | ||||
Measuring range...... | 0 to 130dB(80KHzBW) | |||
S/N accuracy........ | &plu*n;1.2dB | |||
Response characteristics..... | actualvalue | |||
Input level ragne..... | 30μV to 100Vrms(bothnumerator and denominator) | |||
Ratio range....... | 0to &plu*n;130dB(80KHzBW_ | |||
Ratio accuracy......... | &plu*n;1.2dB(1KHz,fullscale input) | |||
Frequency response...... | &plu*n;2dB(standard:1KHz) | |||
Display unit...... | dB,% | |||
Response characteristics... | actual value | |||
Input channels...... | AC input:2 CHs,alternate(Balanced and unbalanced switchable) | |||
Input impedace...... | ACinput:10KΩ,100KΩ≦200pF | |||
Maximum allowable input.... | 150V(DC+AC peak) | |||
Grounding...... | Floatingand non-floating switchable(independently for DC,AC and signal generator) | |||
Averaging count..... | 2,4,8,16,OFF | |||
Built-in filters...... | HPF(100Hz/200Hz/Optional),LPF(15KHz/20KHz/80KHz/Optional),PSOPHO(IHF-A/CCIR-ARM/DIN-AUDIO/Optional) | |||
Optional filters...... | 3KHz BPF/1KHzBPF/315Hz BPF/CCITT P53TEL/C-M*SAGE/IEC-C | |||
Operation specifications... | 1)Single Up;2)Single Down; | |||
3)RepeatUp;4)Repeat Down | ||||
.... | SH1,AH1,T8,L4,SR0,RL1,PP0,DC1,DT1,C1,C2,C3,C27 | |||
1)Panel staus;2)Measurement value output;3)Memorycopy(between same models);4)Memory synchronization(between same models,same versions) | ||||
... | 1) Levelor frequency setting from an external rotary encoder;2)Direct memory call;3)Controloutput;4)Limit judgment output;5)Memory listing;6)8-bit data read;7)Measurementdata print-out. | |||
Memory point count... | 100 steps(Can bedivided into 10 groups.) | |||
Setting contents... | 1)Panelsetting;2)EXT CONTROL I/O; | |||
3)Limitdata batch memory. | ||||
Temperature/humidity for operation.... | 0to 40℃,RC 90% max. | |||
Tempearture/ humidity for characte- ristics in spec. | 6 to 35℃,RC 85% max. | |||
LCD Tempearture /humidity for operation.... | 0to 30℃,RC 90% max. | |||
0 to 40℃,RH60%max. | ||||
Power source..... | 100/120/220/240VAC,&plu*n;10%(max.250V)/Approx.48W | |||
Dimensions..... | 426(W)*99(H)*440(D)mm | |||
Weight.... | Approx.10kg | |||
Accessories.... | Instruction manual(1),cable(1),powercord(1) |
建伍VA-2230A音频分析仪|二手测试仪|现货供应信息由深圳汉润电子发布,为您提供二手仪器的技术支持和保修服务,限期包退包换,让您能放心购买二手仪器,欢迎来电咨询!