绕线型熔断电阻

Electronics (shen zhen ) Co.,Ltd.

1.2品質Quality

  本電阻的制造系經高品質管理程序,并具有高信賴的品質保證。

   The resistor manufactured by highly quality-controlled process and guaranteed high reliability。

1.3標準試驗狀態Stand measuring conditions

  溫度20&plu*n;2℃、濕度65&plu*n;5%。

  但在溫度3~35℃、濕度45~85%之情況下,仍可以給予判定。

   Temperature 20&plu*n;2℃,Humidity65&plu*n;5%。

   Being no doubt about the judgment, measurements can be made within the following temperature3~35℃、

   Humidity45~85%。

1.4型名(例)T*e designation (example)

  依使用種類、額定電力、形狀;電阻值容許差、公稱電阻值而區別,其標示方式如下:

   The t*e designation shall be in the following form and as specified.

1.5訂購方式HOW TO ORDER PART NU*ER

KN  1W  P  J  10R

a     b   c   d   e          

1.6額定電力及尺寸Rated power and dimensions

額定電力系適應在周圍溫度70℃可以連續負載的*大電力,如表-1:但周圍溫度如*過70℃時之額定電力則依圖一的電力輕減曲線實施。

Rated power is maximum power which can be continuously loaded at specified ambient temperature

70℃,however when the ambient temperature exceeds 70℃,rated power should be determined form the derating curve of Fig.1.

表—1   Table—1

C. F-T*e

( “H1”部份可剪，但長度不得小於6mm)

   “H1” part can be cut, but can’t be *all than 6mm