RXG-T 被漆线绕可调电阻器

品牌:克拉型号:RXG-T 种类:线绕性能:通用材料:线绕制作工艺:普通线绕外形:Q 标称阻值:Q 温度系数:A 额定功率:%（W）

产品名称：RXG-T被漆线绕可调电阻器
Product name: RXG-TAdjustable silicon cemented wite wound resistors

型号：RXG-T
T*e: RXG-T

产品介绍：RXG型涂料绕线电阻器其表面覆盖了具有阻燃，*特性的涂料，性能*，使用方便等特点。电阻分为固定式或可调式，可调式可左右移动。固定式有两个或多个电阻脚，电阻脚厚度可根据功率大小调节。
Product introduction: RXG series cement-coated wire wound resistor is covered with * which has inflammability and can resistance to high temperature, it has the characteristic of good ability and easy to use. The resistor can be cl*ed to settled form and adjustive form, and the adjustive form can move right-and-left. The settled form has two or more terminals, its thickness can adjust accord to power.

用途：涂料绕线电阻广泛用于变频器制动，电梯，起重机械以及负载电阻之用。
Purpose: Cement-coated wire wound resistor is used in transducer trig, elevator, derrick and as load resistor widely.

■电气及机械特性 Electrical and Mechanical specifications

特性 Characteristics	规格 Limits	试验方法 Test methods
			阻值及阻值允许偏差 resistance and resistance tolerance	1Ω≤R&plun;5%（J) , 1Ω>R&plun;10%（K）	JIS-C-1
额定负荷 Power rating load	表面*高温度: 5~200W≤275℃ the highest temperature on the surface	JIS-C-4
			短时过负荷 Short-time overload	无可见损伤，ΔR≤&plu*n;（2%R+0.05Ω） no evidence of mechanical damage	JIS-C-5 10倍 5秒 1000% rated power 5 seconds
*缘电阻 Insulation resistance	R≥100MΩ 1min	JIS-C-6 DC500V
			耐电压 Dielectric withstanding voltage	无可见损伤，无飞弧击穿 ΔR≤&plu*n;（0.1%R+0.05Ω） no evidence of mechanical damage or insulation breakdown	JIS-C-7
电阻温度特性 Temperature coefficient	&plu*n;260PPM/℃	JIS-C-2 b
			端子强度 Terminal strength	无松动或机械损伤 not loosely and no evidence of mechanical damage	JIS-C-1(2)
电阻体强度 Resistor strength	无可见损伤 no evidence of mechanical damage	JIS-C-2
			耐振性 Vibration	无可见损伤，ΔR≤&plu*n;（0.1%R+0.05Ω） no evidence of mechanical damage	JIS-C-3 1.5mm 10~55 Hz/ 1Minute
可焊性 Solderability	新焊锡覆盖率为95%以上 95% coverage min.	JIS-C-5 270℃ 5 seconds

■环境特性 Environmental specifications

特性 Characteristics	规格值 Limits	试验方法 Test methods
			耐热性 Heat resistance	除端子外无明显变色和损伤，标志清晰 no deterioration of protective coatings or markings	JIS-C-2 350℃ 2hours
热冲击 Thermal shock	无可见机械损伤 no evidence of mechanical damage	JIS-C-3 额定负载30分钟后-55℃温度下15min After 30minutes rating load , 55℃ 15mintues
			耐湿性 Humidity	无可见损伤，标志清晰，ΔR≤&plun;（3%R+0.05Ω），缘电阻≥10MΩ no deterioration of protective coatings or markings	JIS-C-5 DC100 40℃ 95%RH 500hours
耐久性 (额定负载) Humidity Load life	外观无可见损伤，标志清晰，ΔR≤&plun;（3%R&plun;0.05Ω） no evidence of mechanical damage no deterioration of protective coatings or markings	JIS-C%负荷 rated power load 90 min ON 30 min OFF 500hours

■ 额定功耗曲线 Power Derating Curve

环境温度 environment temperature	0~20℃	20℃以上 above 20℃
功率损耗 pow derating	100%	见图 see the fig.

■ 产品分类标准 cl*ified standard
● 命名方式 how to order

● 型号说明 t*e explanation
RXG为被漆绕线固定电阻器，RXG（T）为被漆绕线可调电阻器
RXG is the wire-wound cement-coating fixed resistor
RXG(T)is the wire-wound cement-coating adjustable resistor

● 结构说明 structure explanation
RXG-A、RXG（T）-A为电阻体与安装支架之间不用瓷片隔离。
RXG-A、RXG（T）-A not using the porcelain sheet to separate the resistor body from the installation frame.

RXG-B、RXG（T）-B为电阻体与安装支架之间使用瓷片隔离。
RXG-B、RXG（T）-B using the porcelain sheet to separate the resistor body from the installation frame.

RXG-D型为电阻体两端使用瓷片并在中间串一根螺栓。
RXG-D using the porcelain sheet on both of the two terminals and they are
series-connected by a screw bolt.