UL0.16-1.0三层*缘线

品牌:YUSHENG 型号:0.16-1.0 额定电压:6000（V）机械寿命:50（万次）产品认证:UL VDE SGS

苏州宇盛电子有限公司

TIW-(B)三层*缘线

1.名称 D*IGNATION

三层*缘线Three Layer Insulation Wire

2. 型号　TYPE

JYS－B　　　YUSHENG Three Layer Insulation Wire (Cl* B)

详细规格请参考附表一 Detail specification please see table 1

3.适用范围 SCOPE

这个规格包含三层*缘金属线使用于是卷绕的小型变压器，是使用在个人计算机，手提式的电话，和IT

装备的开关电源上

This specification covers three layer insulation wore used for winding of micro-transformer which is built in

the personal computer ,portable handy phone ,inverter and IT equipment of switohing power adaptor.。

4. 特性　FEATUR*　

A. 小的外径　　　　　　　　　　　　　　Small Diameter

B. 耐热为IEC的标准为130℃ Temperature index is Cl* B(130℃)of IEC

C. 外皮可直焊可剥皮（机器可自动剥） Easy to strip layers

D. 耐弯曲，磨损能力佳 Good flexibility and good resistance of abrasion

E. 详细特性如附表二 Other detail features see table 2

5.构成　CONSTRU*ION

First Layer TPEE : TPEE: Thermoplastic Polyester Elastomer

Second Layer PET: PET: Polyethylene Terephthalate

Third Layer PA : PA : Polyamide

6.测试方法 T*T METHODS

测试方法请参考附表2

Test methods shall be as given in table 3.

7.检查 INSPE*ION

这检查是对每一批号及规格做检查,检查为抽检方式,使用试验方法为上列第六项这项目明确说明在附2.这

检查结果将*合UL,TUV*要条件.

The inspection is divided into the delivery inspection and t*e ,inspection and shall de carried out, usrried the test

methods referred to in Clause 6 above, the item specified in table 2.The inspection results shall show compliance

with requirement of UL and TUV.

1

8. 包装 PACKAGING

这线将是卷绕在适当的线轴不可松开和纠结,及适当在包装要避免弄伤或缠结在运输过程.

The wires shall be wound on suitable bobbin without loosening and tangle .and adequately packaged to avoid

scotch or tangle during transportation.

9. 长度 LENGTH

这长度一卷*须依照 1Km /卷,3Km/卷and 6Km/卷.

*须是一种规格线径于同一个线架.

整卷线长容许误差为 -0% to 3%.

The length of one roll shall be as 1Km/roll, 3Km/roll and 6Km/roll.

The number of wire shall be one roll by one bobbin.

Tolerance for order shall be form –0% to 3%

10. 表示 MARKING

1. 型号码 Kind or t*e

2. 颜色 Color

3. 导体直径 Conductor diameter

4. 制造编号 Manufacturing number

5. 长度 Length

6. 制造公司 Manufactur’s name

7. 制造日期 Date of manufactur

11. 客户存放注意事项 *T* OF STORAGE BY CUSTOMER

When the wire is storage by the customer, the following storage condition is below:

温度

Temperature

湿度

Relative Humidity

保管期限

Storage term

备注

Note

-25癈∽ 45癈

5 ~ 75%

2 year after shipment

Please check the withstand voltage,

Breakdown voltage,reliability when

Storage in over the term

附表一 Table

导休直径conductor diameter m/m	容许误差Tolerance m/m	*缘厚度		外径			导体阻*Conductor Resistance 20癈 Ω/km	重量Approx m* Kg/km
		Inaulation thickness		Overall diameter
		* 小 m/m	标准 m/m	* 小 m/m	标准 m/m	* 大 m/m
0.16	?0.008	0.084	0.100	0.34	0.36	0.38	508.8	0.30
0.20	?0.008	0.084	0.100	0.37	0.40	0.420	607.6	0.39
0.21	?0.008	0.084	0.100	0.38	0.41	0.43	549.0	0.42
0.22	?0.008	0.084	0.100	0.39	0.42	0.444	498.4	0.46
0.23	?0.008	0.084	0.100	0.40	0.43	0.45	454.5	0.49
0.24	?0.008	0.084	0.100	0.41	0.44	0.46	416.2	0.53
0.25	?0.008	0.084	0.100	0.42	0.45	0.47	382.5	0.57
0.26	?0.01	0.084	0.100	0.43	0.46	0.48	358.4	0.61
0.27	?0.01	0.084	0.100	0.44	0.47	0.49	332.4	0.65
0.28	?0.01	0.084	0.100	0.45	0.48	0.50	307.3	0.69
0.29	?0.01	0.084	0.100	0.46	0.49	0.51	285.7	0.73
0.30	?0.01	0.084	0.100	0.47	0.50	0.520	262.9	0.79
0.32	?0.01	0.084	0.100	0.49	0.52	0.54	230.3	0.88
0.35	?0.01	0.084	0.100	0.52	0.55	0.57	191.2	1.03
0.37	?0.01	0.084	0.100	0.54	0.57	0.59	170.6	1.14
0.40	?0.01	0.096	0.111	0.58	0.60	0.625	145.3	1.31
0.45	?0.01	0.096	0.111	0.63	0.65	0.675	114.2	1.63
0.50	?0.01	0.096	0.111	0.68	0.70	0.725	91.43	1.958
0.55	?0.02	0.096	0.111	0.72	0.75	0.78	78.15	2.37
0.60	?0.02	0.096	0.111	0.77	0.80	0.83	65.26	2.793
0.65	?0.02	0.096	0.111	0.82	0.85	0.88	55.31	3.249
0.70	?0.02	0.096	0.111	0.87	0.90	0.93	47.47	3.74
0.75	?0.02	0.096	0.111	0.92	0.95	0.98	41.19	4.267
0.80	?0.02	0.096	0.111	0.97	1.00	1.03	36.08	4.829
0.85	?0.02	0.096	0.111	1.02	1.05	1.08	31.87	5.425
0.90	?0.02	0.096	0.111	1.07	1.10	1.13	28.35	6.056
0.95	?0.02	0.096	0.111	1.12	1.15	1.18	25.38	6.721
1.00	?0.03	0.096	0.111	1.17	1.20	1.23	23.33	7.422

Note: Minimum insulation thickness and nominal insulation thickness shall be calculated as follows

in principle . Applicable calculations are base on 0.25 m/m and 0.5m/m.

Min. T=D/75 0.025Nom.T=Min. T?1.15~1.17

T: Insulation thickness D: Insulation diameter

特性 Characteristics 附表2-1 TABLE2-1

	项目 Item		特性 Characteristics	试验方法及法规 Applicable clause	形式检查 T*e inspection	出货检查 delivery inspection
1	外观 (mm) Appearance		不可有破损,脏污,变形,和标示不清 No flaw, dirt, deformation and marked float.	JIS C 3005 4.1 MTM-I-9-5 7.1	0	0
2	构造 (mm) Conductor		如附表一 Refer to Table 1	JIS C 3005 4.3 MTM-I-9-5 7.2	0	0
3	导体阻* Conductor resistance		如附表一 Refer to Table 1	JIS C 3005 4.7 MTM-I-9-5 7.3	0	0
4	耐电压 Dielesctric with Stand voltage	绞线测试 Twisted	能承受6000V一分钟 To withstand 6000V for 1 Min	IC69050 U.2,1 MTM-I-9-5 7.4.1 JIS C 3005 4.1,A,C MTM-I-9-5 6.3	0	0
		生产检查 spark	3000V用力0.15秒测试 To withstand 3000V for 0.15S		0	-
		水中测试 In water	能承受500V一分钟 To withstand 500V for 1 Min		0	-
		水中测试 In water	能承受500V一分钟 To withstand 500V for 1 Min		0	-
5	*缘阻体 Insulation resistance		1 Mohm 以上 Not less than 1 Mohm	JIS C 3005 4.7.1 MTM-I-9-5 7.5	0	-
6	密合性 Adgerence		*缘不会破裂露出铜线 No srack through conductor visible	JIS C 3003 9 MTM-I-9-5 7.6	0	-
7	*性 Resistance to abrasion		60次以上 Not less than 60 times	JIS C 3003-1976 10 MTM-I-9-5 7.7	0	-
8	*缘破坏电压 (V) Breakdown voltage		10000V以上 Not less than 10000V	JIS C 3003 11 MTM-I-9-5 7.8	0	-
9	耐*性 (篊) Resistance to cut through		240篊以上 Not less than240篊	JIS C 3003 12 MTM-I-9-5 7.9	0	-
10	卷线加热 Heat winding		*缘不会破裂露出铜线 No crack through conductor visible	JIS C 3005 4.19.1 MTM-I-9-5 7.10	0	-
11	耐溶剂		无发泡,或破损现象	JIS C 3003 11	0	-

	Resistance to solvent		No bubbles or blisters on insulation 不会有*缘层剥落现象 No delamination through conductor visible	MTM-1-9-5 7.11


12	焊接能耐在 (S) Solderability		可均匀焊锡,且不会有大量碳化物 Uniformly solderiong and no more slags	JIS C 3003 16 MTM-1-9-5 7.12	0	0

13	耐热老化性 Thermal aging		能承受6000V一分钟 To withstand 6000V for 1 Min	JIS C 3005 4.17,UL1581 MTM-1-9-5 7.13 IEC60950 U2.1	0



14	耐然性 Flame retardance	JIS	然烧*须于60秒内自然熄灭 Flame shall go out naturally within 60S	JIS C 3005 4.26.2 MTM-1-9-5 7.13 UL1581-VW-1

		UL 1581 VW-1	A然烧须于60秒内自然熄灭 A. Flame shall go out within 60S B不过25%的面积然烧或续然 B. Not more than 25% area of flaming or burning C然烧物掉落棉布不会继续然烧 C .No flaming of cotton because of the flaming material drop		0







15	柔软性及粘着性能破坏电性 Flexibility and adherence breakdown voltage		不会有铜线暴露及分层的状况 No exposure of conductor and on delamination 能承受3000V一分钟 To withstand 3000V for 1 Min	IEC69050 U.2.2 MTM-1-9-5 7.15	0




16	高温冲击崩溃电压 Heat shock breakdown voltage		*缘层不会破坏 No cracks on insulation 能承受3000V一分钟 To withstand 3000V for 1 Min	IEC69050 U.2.3 MTM-1-9-5 7.16	0	0



17	弯曲后的*缘耐压 Retention of Electric strength		能承受3000V一分钟 To withstand 3000V for 1 Min	IEC69050 U.2.4 MTM-1-9-5 7.17	0	0

供应UL0.16-1.0三层*缘线