图文详情
产品属性
相关推荐
HMC630LP3和HMC631LP3(E)产品是GaAs HBT矢量调节器RFIC,分别适用范围为700至1000兆赫和800至2700兆赫HMC630LP3和HMC631LP3(E)高动态范围矢量调制器RFIC针对失真消除应用设计,如射频RF预失真和正反馈,以及RF射频消除,波束整形和幅度/相位校正。HMC630LP3和HMC631LP3(E)的I和Q端口可用于连续调整RF信号相位和幅度,调整范围分别为360°和40dB,3dB调制带宽为180MHz。HMC630LP3和HMC631LP3(E)矢量调制器RFIC的输入IP3为+34dBm,输出噪声160dBm/Hz,并且在整个增益控制范围内保持恒定。
HMC630LP3和HMC631LP3(E)矢量调制器能更紧凑更一致地用于基于MIC矢量调制器的复合型次组装。HMC630LP3和HMC631LP3(E)采用管脚兼容安装,并*合RoHS 3x3毫米的QFN无铅表面贴片SMT封装,从一个单一的+8v电源供应中只消耗少于95毫安的电流。
The HMC630LP3 & HMC630LP3E are high dynamic range Vector Modulator RFICs which are targeted for RF predistortion and feed-forward cancellation circuits, as well as RF beam forming and amplitude/ phase correction circuits. The I & Q ports of the HMC630LP3(E) can be used to continuously vary the phase and amplitude of RF signals by up to 360 degrees and 40 dB respectively, while supporting a 3 dB modulation bandwidth of 180 MHz. With an output IP3 of +24.5 dBm and output noise floor of -162 dBm/Hz (at maximum gain setting), the output IP3/ noise floor ratio is 186.5 dB
Features• Continuous Phase Control: 360°• Continuous Gain Control: 40 dB • Low Output Noise Floor: -162 dBm/Hz • High Input IP3: +34 dBm • 16 Lead 3x3mm SMT Package: 9mm² | T*ical Applications• Wireless Infrastructure HPA & | Functional Diagram |
深圳浩时健电子长期供应Hittite的放大器、衰减器、鉴相器、分频器、倍频器、混频器、调制器、模拟移相器、功率检测器、射频开关、压控振荡器VCO、PLOs和微波模块
HMC135 | HITTITE | Chip | 双相调制器 |
HMC136 | HITTITE | Chip | 双相调制器 |
HMC137 | HITTITE | Chip | 双相调制器 |
HM*95LP3 | HITTITE | LP3 | 直接调制器 |
HM*96LP3 | HITTITE | LP3 | 直接调制器 |
HM*97LP4 | HITTITE | LP4 | 直接调制器 |
HMC696LP4E | HITTITE | LP4 | 直接调制器 |
HMC697LP4 | HITTITE | LP4 | 直接调制器 |
HMC795LP5E | HITTITE | LP5 | 直接调制器 |
HMC500LP3 | HITTITE | LP3 | 矢量调制器 |
HMC630LP3 | HITTITE | LP3 | 矢量调制器 |
HMC631LP3 | HITTITE | LP3 | 矢量调制器 |