志信ZXBJD*爆警示灯

适用范围： 1、*性气体混合物危险场所：1区、2区。 2、*性气体混合物：ⅡA、ⅡB。 产品特点： 1、铸铝合金壳体，表面喷塑。 2、钢化玻璃罩，具有较强的*冲击能力，并有红、黄、蓝等多种颜色可供选择。 3、钢管或电缆布线均可。 点击数：1130 录入时间：2006-12-01 【打印此页】

■安装、使用与维修

﹒安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相*

﹒产品应*接地

﹒无论何种接线须将引入装置密封圈压。

﹒维修时*须切断前级电源后开盖

﹒引入装置密封圈和橡胶垫均采用耐油橡胶3001制造，用户在使用、

维修过程中若发现老化应与制造厂联系定购，并及时更换以**

爆性能

﹒在隔爆面上均匀涂以204-1*锈油脂后在投入使用

﹒周围环境温度为-20～+40⁰C

﹒周围空气相对湿度不大于95%

﹒在无显著摇动和冲出振动的地方

﹒污染等级为3级

﹒无破坏金属和*缘的腐蚀性气体或蒸汽的地方

□Installation usage, maintenance.

﹒Check the data before install it.

﹒Product should be link to ground.

﹒Cable should pressurized in to airproof quoit.

﹒cut off power before maintenance.

﹒In-build System and the rubber circle are made of oil-proof 3001, you

should contact our factory if the airproof quoit is damaged.

﹒Mop up 204-4 antirust grease before use it.

﹒The environment temperature is-20～+40⁰C

﹒The relative humidity of the air around the equipment is not over95%

﹒No distinct shaking,concussion and libration

﹒The pollution grade is 3

﹒No corrosive gas and steam which can destroy the insulation of the metal

■安装、使用与维修

﹒安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相*

﹒产品应*接地

﹒无论何种接线须将引入装置密封圈压。

﹒维修时*须切断前级电源后开盖

﹒引入装置密封圈和橡胶垫均采用耐油橡胶3001制造，用户在使用、

维修过程中若发现老化应与制造厂联系定购，并及时更换以**

爆性能

﹒在隔爆面上均匀涂以204-1*锈油脂后在投入使用

﹒周围环境温度为-20～+40⁰C

﹒周围空气相对湿度不大于95%

﹒在无显著摇动和冲出振动的地方

﹒污染等级为3级

﹒无破坏金属和*缘的腐蚀性气体或蒸汽的地方

□Installation usage, maintenance.

﹒Check the data before install it.

﹒Product should be link to ground.

﹒Cable should pressurized in to airproof quoit.

﹒cut off power before maintenance.

﹒In-build System and the rubber circle are made of oil-proof 3001, you

should contact our factory if the airproof quoit is damaged.

﹒Mop up 204-4 antirust grease before use it.

﹒The environment temperature is-20～+40⁰C

﹒The relative humidity of the air around the equipment is not over95%

﹒No distinct shaking,concussion and libration

﹒The pollution grade is 3

﹒No corrosive gas and steam which can destroy the insulation of the metal

有*爆的地方 就有志信电气