16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.
n 16 kB on-chip Static RAM.
n 128/256 kB on-chip Flash Program Memory. 128-bit wide interface/accelerator
enables high speed 60 MHz operation.
n In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
boot-loader software. Flash programming takes 1 ms per 512 byte line. Single
sector or full chip erase takes 400 ms.
n EmbeddedICE-RT interface enables breakpoints and watch points. Interrupt
service routines can continue to execute whilst the foreground task is debugged
with the on-chip RealMonitor™ software.
n Embedded Trace Macrocell™ enables non-intrusive high speed real-time tracing
of instruction execution.
n Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
n Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs),
Real Time Clock and Watchdog.
n Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s)
and two SPIs™.
n 60 MHz maximum CPU clock available from programmable on-chip
Phase-Locked Loop with settling time of 100 ms.
n Vectored Interrupt Controller with configurable priorities and vector addresses.
