供应U* BDM Multilink*器U*MULTILINKBDME

U*-ML-12

U* BDM Multilink
U*MULTILINKBDME

P&E U*BDM Multilink Cable for the 68HC(S)12(X) and 68HCS08 and 68RS08 and ColdFire V1

P&E U* BDM Cable交互式转换接口(U*)

Windows 98SE/2000/XP/2003/Vista

• 支持Freescale 68HC(S)12(X)/68HCS08/68RS08/ColdFire V1
• 计算机U*接口 ( Windows 98SE/2000/XP/2003/Vista )
• 通过U*供电
• 目标板电压1.6V-5.25V
• 目标板频率32Khz-50Mhz
• 自动判断HCS08 设备的频率+全兼容能力
• 自动判断HC(S)12(X) 设备的频率
• 对RS08设备在R*ET line生成烧写电压
• 无随机软件

P&E’s U* BDM MULTILINK is a debug interface which allows a PC access to the Background Debug Mode (BDM) on Freescale HCS08, HC(S)12(X), RS08, and ColdFire V1 microcontrollers . It connects between a U* port on a Windows machine and the standard 6 pin “Berg” debug connector on the target.

By using the U* BDM MULTILINK, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.

The U* BDM MULTILINK works with P&E Microcomputer System's in-circuit de* and flash programmer to allow debug and flash programming of the target processor. P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface

       李进

深圳博瑞图电子科技有限公司

     :

MOB    :

FAX     :

ADD    :深圳市福田区福明路雷圳大厦西半层503室（上海宾馆对面）

:

网     址：www.szprotools.com