| |
HRBFXZ系列变频串联谐振交流耐压高压试验装置 |
|
| |
对于任何一个电*器（其电感为L）和电容器（其电容为C）组成的串联LC谐振电路而言，他都有一个固定的频率f=1/2π根号LC，当外加电源信号的频率等于这个频率时，该电路将发生谐振。谐振时，电感上及电容上获得的电压*大，而大多数的被试品都可以等效成一个电容器。基于这一思想，在串联谐振电路前提供一个调节频率又可调节电压的变频变压电源，在电容两端并联一个分压器作测量及反馈之用，这样就可构成该套装置。 |
|
| |
 |
|
| |
产品技*指标： |
|
| |
1、环境温度： -10℃～45℃
2、工作湿度： ≤90%
3、海拔高度： ≤2000m
4、电源输入： 380V±10%三相或 220V±10%单相(10kW以下),50Hz
5、额定试验容量： 0～10000kVA
6、谐振电压： 0～1000kV
7、频率调节范围： 0.1～300Hz
8、系统测量精度： 0.5/1.0级
9、频率调节分辨率： 0.01Hz
10、不稳定度： ≤0.05%
11、输出波形： 正弦波
12、波形畸变率： ≤0.5%
13、噪声：≤60dB
14、电*器Q值： 30～120
15、内部由嵌入式工控机纯程控控制，所以测量试验过程全自动化，也可实现手动测量试验，大液晶触摸屏汉字显示和通过U*--U盘存贮与打印功能，中文菜单显示人机对话操作功能，可选配微机（PC机）试验测控U*通信接口及全自动试验测控软件。
|
|
| |
成套装置构成 |
|
| |
1、变频调压电源：既可改变输出的频率、又可改变其输出的电压。
2、激励变压器： 起耦合信号及电压变换的作用，并按自身的变比来*电压。
3、电*器： 与被试品串联，构成LC回路。
4、分压器： 用来测量被试品上的电压，同时作为采样信号反馈给仪器。
5、补偿电容器： 用来调整被试品频率。
|
|
| |
 |
|
| |
产品的技*依据和引用执行的标准 |
|
| |
GB2900 《电工名词*语》
GB10229-88 《电*器》
DL/T596-1996 《电力设备*性试验规程》
GB/T16927.1-2-1997 《高电压试验技*》
ZBK41006-89 《试验变压器》
GB7328-87 《变压器和电*器的声级测量》
IEC358（1990） 《耦合电容器和电容分压器》
IEC1000 《电磁兼容性》
GB4793-1984 电子测量仪器*要求
GB/T2423.8-1995 电工电子产品基本环境试验规程
GB1094-1-GB1094.6-96 《外壳*护等级》
GB/T3859.1-1993 半导体变流器基本要求的规定
GB/T3859.2-1993 半导体变流器 应用导则
|
|
| |
HRBFXZ-15500kVA/1550kV ，10A变频串联谐振交流耐压高电压试验装置 |
|
| |
Series resonant frequency exchange of high-voltage
pressure test equipment pressure HRBFXZ-15500kVA/1550kV ，10A |
|
| |
For any reactor (inductance as L) and capacitors (the capacitor for C) consisting of series LC resonant circuit, he has a fixed frequency f = 1/2π radical LC, when the external power signal equal frequency when the frequency of the resonant circuit will occur. Resonance, the inductance and capacitance on the voltage on access to the largest, and most of the sample can be equivalent to a capacitor. Based on this idea, in the series resonant circuit to provide a voltage regulator can adjust the frequency of the inverter transformer power supply, in parallel at both ends of a capacitor voltage divider for the measurement and feedback purposes, then this will constitute the set of devices.
Product Specifications:
1, ambient temperature: -10 ℃ ~ 45 ℃
2, the Working humidity: ≤ 90%
3, altitude: ≤ 2000m
4, power input: 380V ± 10% three-phase or 220V ± 10% single-phase (10kW below), 50Hz
5, the rated capacity test: 0 ~ 15500kVA
6, resonant voltage: 0 ~ 1550kV
7, the frequency adjustment range: 0.1 ~ 300Hz
8, the system measurement accuracy: 0.5/1.0 cl*
9, frequency adjustment resolution: 0.01Hz
10, instability: ≤ 0.05%
11, the output waveform: sine wave
12, waveform distortion rate: ≤ 0.5%
13, Noise: ≤ 60dB
14, reactor Q value: 30 ~ 120
15, the internal net from the embedded computer program control, so the process of fully automated measurement test can also be measured manually pilot implementation, large LCD display and touch-screen characters through the U* - U disk storage and print functions, man-machine English menu display dialogue operation feature matching computer (PC machine) test monitoring and control U* communication interface and automatic test monitoring and control software.
Constitute a set of devices
1, frequency regulator power: it can change the output frequency, but also to change its output voltage.
2, excitation transformers: voltage from the coupling signal and the role of transformation, and its ratio to increase voltage.
3, reactor: with the sample in series, constitute a LC circuit.
4, divider: test materials were used to measure the voltage on at the same time as the feedback signal to the sampling apparatus.
5, compensation capacitors: materials used to adjust the frequency of the test.
Products based on the technology and the implementation of the standard reference
GB2900 "electrical terminology"
GB10229-88 "Reactor"
DL/T596-1996 "test electrical equipment preventive point of order"
GB/T16927.1-2-1997 "high-voltage test technique"
ZBK41006-89 "Test Transformer"
GB7328-87 "of transformer and reactor sound level measurement"
IEC358 (1990) "Coupling capacitors and capacitor divider"
IEC1000 "electromagnetic compatibility"
GB4793-1984 safety requirements for electronic measuring instruments
Electrical and Electronic Products GB/T2423.8-1995 basic environmental testing order
GB1094-1-GB1094.6-96 "Level protective shell"
GB/T3859.1-1993 semiconductor converter provides the basic requirements of
GB/T3859.2-1993 semiconductor converter application guidelines
|
| |
