供应网络信号*雷器

应用场合：保护敏感的网络信号线路免受雷电过电压、感应过电压、过电流的、静电放电等造成的损坏。                                                              

典型应用于Rj45网络信号端口。                                                             

主要型号：*S05RJ45M4、*S05RJ45M8 、*S05RJ45M16、*S05RJ45M24                                                             

主要特点：                                                           

v  采用*大容量浪涌吸收元件，通流量大；                                                             

v  采用*电容设计，信号传输特性能好；                                                          

v  采用多级保护设计，性能*；                                                          

v  纳秒级快速响应；                                                          

v  断态漏电流*低，不影响设备正常工作；                                                          

v  残压低、保护设备**；                                                             

v  安装简单，免维护；                                                             

技术参数：                                                           

型号       *S05RJ45M4   *S05RJ45M8    *S05RJ45M16     *S05RJ45M24    

持续工作电压       5V                                                   

限制电压（10/700us） 20V                                                      

标称通流容量       5KA                                                       

适合数*输速率            100Mbps                                                     

*损耗       ≦0.5DB                                                       

响应时间         1ns                                                      

保护形式       串接于线路和设备端之间                                                    

外型尺寸       25X25X80(mm)            478X150X99(mm)

工作环境                     温度-40C~~+85C,相对湿度<=95%（25C）                                                   

安装说明：将*雷器（SPD）串接于线路和需保护的设备端口之间。将SPD上的接地端口，使用多股铜导线就近接入地网，且应*接地电阻不大于4欧姆。                                                           

注意事项：安装时要*安装到位，使RJ45端口结合牢固。切勿带电安装SPD，否则可能损坏SPD和需保护的设备。