图文详情
产品属性
相关推荐
ADS-038手持式可视红光源采用650nm激光器作为发光器件,输出功率可达1mW,适用于单模或者多模光纤的测量。
ADS-038既可采用2节*常见的5号电池(AA电池)供电,也可采用5号充电电池供电(内部有升压电路),连续工作时间可达30小时以上。
ADS-038另有低压告警功能(LED直观显示)
ADS-038手持式红光源使用FC型适配器作为主要输出接口,也可以使用简便的“速接”接口,适合于*
产品特性:
-恒功率输出,性能稳定,寿命长
-采用光纤输出,入纤功率高
-可选用5号充电电池供电,**
-有低电压检测告警指示功能
-支持直流和调制工作模式
-光纤中传输距离达5公里
-轻易识别光纤断点,弯曲,可以通过有保护层的光纤
-实现端到端光纤识别
-完成机械接续点的检测与优化
-卡通造型面板,美观大方
技术指标
仪表型号 |
ADS-038 |
输出功率 |
1mW |
波长 |
650nm |
谱宽( |
<5nm |
适用光纤 |
SM、MM |
输出方式 |
直流或调制(调制频率2Hz) |
连接器 |
|
电池连续工作时间 |
≥30小时 |
电源 |
2节AA碱性电池 或 2节AA充电电池 |
工作温度(℃) |
-10~+45 |
存储温度(℃) |
-25~+65 |
尺寸(mm) |
135×70×24(长×宽×厚) |
重量(g) |
250(含电池) |
标准配置:
可视红光源一台,使用说明书一份,5号电池两节(电池限江浙江沪地区)
注意事项:
1) 激光有害,尤其要注意保护眼睛,激光器工作时,禁止照射眼睛
2) 一般情况下,温度越高,激光器的寿命越短
3) 激光器工作时,被测光纤端面应清洁干净
4) 长期使用后,红光笔输出端口可能粘有污垢,造成输出功率下降,这时用户可用沾上无水酒精的棉签清除污垢,再用干棉签去除痕迹
5) 不使用本激光光源时,请将*尘帽戴好以避免灰尘污染
6) 长期不使用时,请将电池取出
7) 本产品电源推荐使用5号镍氢充电电池,也可使用两节标准5号AA碱性电池供电
8) 请将废弃的一次性电池放入指定点回收,注意环境保护。
关键词:红光源,可视激光光源,可视故障检测仪,手持式红光源,光纤红光笔,可视激光器
原产地:上海
供货周期:现货供应
Description:
With a 650nm visible fiber diode, Visual Fault Locator ADS-038 can be operated in either continuous-wave (CW) mode or pulse mode.
ADS-038 Visual Fault Locator is used for the measurement in single-mode or multi-mode fibers. The ADS-038 visual fault locator easily identifies the cutting, micro-bending of the optic fiber, p*es through the jacket fiber and performs an end-to-end fiber identification. Its measurement range is up to
Specification
T*e |
ADS-038 |
Output Power |
1mW |
Wavelength |
650 |
Spectral Width( |
<5nm |
Fiber Model |
SM、MM |
Connector |
|
Power |
AA Rechargeable or AA alkaline battery |
|
30 hours |
Operating Temperature(℃) |
-10~+45 |
Storage Temperature(℃) |
-25~+70 |
Dimension (without connector)(mm) |
135*70*24 (L*W*D) |
Unit Weight(g) |
250 |
Features:
Compact size and light weight, suitable for field testing
End-to-end visual fiber identification with high power
AA Rechargeable battery can be option
Low-battery detectory & indication
Locates fault up to
Can easily detects breaks, micro-bends
ADS038
abright